Home
About
  1. Company
  2. Culture
  3. Honor
  4. Warehouse
  5. Customer
Products
  1. ABS
  2. PC
  3. POM
  4. PPS
  5. PEI
  6. PBT
  7. LCP
  8. PEEK
  9. Nylon
  10. PE
  11. PP
  12. TPU
  13. TPV
  14. TPE
  15. PMMA
  16. PVDF
  17. ASA
  18. HT-Nylon
  19. Alloy
  20. GPPS
  21. HIPS
  22. EVA
  23. PPO
  24. Spec-Nylon
  25. PSU
  26. PVC
  27. TPEE
  28. PCTG
  29. FEP
  30. COC
  31. PARA
Quotation
  1. Universal Plastics
  2. Press
  3. According
  4. Plastic sheet
  5. Plastic bar
  6. Plastic
Supply
Plastics application
  1. Conductive plastic
  2. Anti-static plastic
Plastic technology
  1. Company News
  2. Plastics information
  3. Plastic technology
Plastic Data sheet
Contact
  1. Contact information
  2. Online message
EN
  1. 中文
Tel: 188-1699-6168()
Address: Room 908, No. 28, Moyu Road, Anting Town, Jiading District, Shanghai

Scan the wechat code for consultation

Current position： Home > Plastic technology > Company News

SABIC ULTEM PEI Grades

Release time：2025-06-20Author：小编

Previous article The next one Return
ULTEM™ RESINS
ULTEM™ resin is a Polyetherimide (PEI), which offers a unique combination of thermal performance, high modulus, dimensional stability, near-infrared transparency, and non-halogenated FR for a wide range of demanding applications. EXTEM™ resin is well-suited for applications that require a higher thermal performance, such as co-packaged optical components. SILTEM™ resin is an easy extrudable amorphous copolymer with no intentionally added PFAS for potential use in applications such as high-performance
ULTEM™ resin is a Polyetherimide (PEI), which offers a unique combination of thermal performance, high modulus, dimensional stability, near-infrared transparency, and non-halogenated FR for a wide range of demanding applications. EXTEM™ resin is well-suited for applications that require a higher thermal performance, such as co-packaged optical components. SILTEM™ resin is an easy extrudable amorphous copolymer with no intentionally added PFAS for potential use in applications such as high-performance wires and cables.
The ULTEM™ resin family of amorphous thermoplastic polyetherimide (PEI) materials offers outstanding elevated thermal resistance, high strength and stiffness, and broad chemical resistance. ULTEM resins are available in transparent and opaque custom colors, as well as glass filled grades. These materials uniquely balance both mechanical properties and processability, offering design engineers exceptional flexibility and freedom. Also available are ULTEM copolymers which support even higher heat, chemical and elasticity needs. An ISCC+ certified renewable bio-based portfolio has recently been launched, offering sustainability benefits with interchangeable performance.
Benefits 　 　 　 　
LONG-TERM HEAT RESISTANCE 　 　 　 　
Excellent stability of physical and mechanical properties at elevated temperatures thanks to high glass transition temperature of 217 °C. Available with relative thermal indices (RTI) up to 180 °C
STRENGTH AND STIFFNESS 　 　 　 　
Outstanding mechanical performance when compared to other amorphous thermoplastic resins among the available alternatives, with predictable stiffness and strength up to 200 °C. Unfilled, transparent grades are equal in strength to other thermoplastics with opacifying fillers.
DIMENSIONAL STABILITY 　 　 　 　
Among the most dimensionally stable thermoplastics available, offering predictability over a wide temperature range. Filled grades offer exceptionally high-tolerance dimensional capabilities.
ENVIRONMENTAL STRESS & CRACKING RESISTANCE 　 　 　 　
Unlike most other amorphous thermoplastics, ULTEM resins retain strength and resist stress cracking when exposed to automotive and aircraft fluids, aliphatic hydrocarbons, alcohols, acids, and weak aqueous solutions.
FLAMMABILITY, SMOKE GENERATION AND TOXICITY 　 　 　 　
Inherent flame resistance without additives in most grades - exceptionally difficult to ignite, with a limiting oxygen index (LOI) of 47%, meeting UL94 V0 specifications in sections as thin as 0.41 mm. Generates extremely low smoke per the NBS smoke evolution test, with products of combustion no more toxic than those of wood.
PROCESSABILITY 　 　 　 　
Can be extruded, thermoformed, extrusion blow molded and injection molded, and flowability permits long flow lengths down to 0.2mm thick using conventional injection molding equipment.
SUSTAINABILITY 　 　 　 　
A portfolio of ISCC+ certified renewable bio-based ULTEM™ resins offers sustainability benefits while delivering exactly the same high performance and processability as incumbent ULTEM materials. Using a mass balance approach, for every 100 kg of ULTEM resin produced, SABIC replaces 25.5 kg of fossil-based feedstocks with bio-based materials derived from waste or residue, such as crude tall oil from the wood industry.
1000 　 　 　 　
ULTEM 1000 resin is an amorphous, transparent polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217°C. This inherently flame retardant resin has UL94 V0, V2 and 5VA ratings and is RoHS compliant. ULTEM 1000 resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101048254 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.4 mm UL 94
UV-light, water exposure/immersion 　 F2 - UL 746C
Oxygen Index (LOI) 　 47 % ASTM D2863
Oxygen Index (LOI) 　 47 % ISO 4589
Glow Wire Flammability Index 960°C, passes at 5) 3.2 mm IEC 60695-2-12
NBS Smoke Density, Flaming, Ds 4 min 　 0.7 - ASTM E662
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-410 °C 　
Nozzle Temperature 　 345-405 °C 　
Front - Zone 3 Temperature 　 345-415 °C 　
Middle - Zone 2 Temperature 　 340-405 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-180 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw speed (Circumferential speed) 　 0.2-0.3 m/s 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
ELECTRICAL 3) 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 33 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 25 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 1 MHz 　 0.006 - IEC 60250
Relative Permittivity, 50/60 Hz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0005 - IEC 60250
Dielectric Constant 6) 　 　 　
at 1.1 GHz 　 3.01 - -
at 5 GHz 　 3.02 - -
at 10 GHz 　 3.02 - -
Dissipation Factor 6) 　 　 　
at 1.1 GHz 　 0.0012 - -
at 5 GHz 　 0.0024 - -
at 10 GHz 　 0.0027 - -
Comparative Tracking Index 5) 150 V IEC 60112
Comparative Tracking Index, M 5) 100 V IEC 60112
Volume Resistivity 　 1.00E+17 Ω.cm ASTM D257
Dielectric Strength, in air, 1.6 mm 　 32.7 kV/mm ASTM D149
Dielectric Strength, in oil, 1.6 mm 　 28 kV/mm ASTM D149
Dielectric Strength, in oil, 3.2 mm 　 19.7 kV/mm ASTM D149
Relative Permittivity, 100 Hz 　 3.15 - ASTM D150
Dissipation Factor, 100 Hz 　 0.0015 - ASTM D150
Relative Permittivity, 1 kHz 　 3.15 - ASTM D150
Dissipation Factor, 1 kHz 　 0.0012 - ASTM D150
Comparative Tracking Index (UL) {PLC} 1) 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 1) ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 1) ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 1) ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 1) ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 1) 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 1) 5 PLC Code ASTM D495
PHYSICAL 3) 　 　 　
Density 　 1.27 g/cm³ ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs) 　 0.2 % ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium) 　 0.7 % ISO 62-4
Water Absorption, (23°C/24hrs) 　 0.25 % ISO 62-1
Water Absorption, (23°C/saturated) 　 1.25 % ISO 62-1
Melt Volume Rate, MVR at 360°C/5.0 kg 　 13 cm³/10 min ISO 1133
Specific Gravity 　 1.27 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.25 % ASTM D570
Water Absorption, (23°C/Saturated) 　 1.25 % ASTM D570
Melt Flow Rate, 337°C/6.6 kgf 　 9 g/10 min ASTM D1238
Poisson's Ratio 　 0.36 - ASTM E132
Mold Shrinkage, flow, 3.2 mm 4) 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 4) 0.5-0.7 % SABIC method
THERMAL 3) 　 　 　
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 209 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 192 °C ISO 75/Af
Vicat Softening Temp, Rate A/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 212 °C ISO 306
CTE, -40°C to 150°C, flow 　 5.20E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 5.20E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASS - IEC 60695-10-2
Thermal Conductivity 　 0.22 W/m-°C ISO 8302
HDT, 0.45 MPa, 6.4 mm, unannealed 　 210 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 201 °C ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed 　 207 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 190 °C ASTM D648
Vicat Softening Temp, Rate B/50 　 211 °C ASTM D1525
CTE, -20°C to 150°C, flow 　 5.20E-05 1/°C ASTM E831
CTE, -20°C to 150°C, xflow 　 5.20E-05 1/°C ASTM E831
Thermal Conductivity 　 0.22 W/m-°C ASTM C177
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
IMPACT 3) 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 6 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 6 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Izod Impact, unnotched, 23°C 　 1800 J/m ASTM D4812
Izod Impact, unnotched, -30°C 　 1540 J/m ASTM D4812
Izod Impact, notched, 23°C 　 53 J/m ASTM D256
Izod Impact, notched, -30°C 　 50 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 1335 J/m ASTM D256
Gardner, 23°C 　 36 J ASTM D3029
MECHANICAL 3) 　 　 　
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 3200 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 160 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
Hardness, Rockwell M 　 106 - ISO 2039-2
Tensile Stress, yld, Type I, 50 mm/min 　 115 MPa ASTM D638
Tensile Strain, yld, Type I, 50 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 50 mm/min 　 60 % ASTM D638
Tensile Stress, yld, Type I, 5 mm/min 　 110 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 60 % ASTM D638
Tensile Modulus, 5 mm/min 　 3350 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 165 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3200 MPa ASTM D790
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 160 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 3400 MPa ASTM D790
Hardness, Rockwell M 　 109 - ASTM D785
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy ASTM D1044
EXTRUSION BLOW MOLDING 　 　 　 　
Drying Temperature 　 140-150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.01-0.02 % 　
Melt Temperature (Parison) 　 320-355 °C 　
Barrel - Zone 1 Temperature 　 325-350 °C 　
Barrel - Zone 2 Temperature 　 330-355 °C 　
Barrel - Zone 3 Temperature 　 330-355 °C 　
Barrel - Zone 4 Temperature 　 330-355 °C 　
Adapter - Zone 5 Temperature 　 330-355 °C 　
Head - Zone 6 - Top Temperature 　 330-355 °C 　
Head - Zone 7 - Bottom Temperature 　 330-355 °C 　
Screw Speed 　 10-70 rpm 　
Mold Temperature 　 65-175 °C 　
Die Temperature 　 325-355 °C 　
1000FC 　 　 　 　
ULTEM 1000FC resin is an amorphous, transparent polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217?C. This inherently flame retardant resin has UL94 V0, V2 and 5VA ratings and is RoHS compliant. ULTEM 1000FC resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures. This grade is US FDA and EU Food Contact compliant and has NSF51 listing for selected colors.Europe
1010 　 　 　 　
ULTEM 1010 resin is an amorphous, transparent polyetherimide (PEI) plastic offering enhanced flow and a glass transition temperature (Tg) of 217°C. This inherently flame retarant resin has UL94 V0 and 5VA ratings. ULTEM 1010 resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101048269 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.4 mm UL 94
Oxygen Index (LOI) 　 44 % ASTM D2863
Oxygen Index (LOI) 　 47 % ISO 4589
NBS Smoke Density, Flaming, Ds 4 min 　 2 - ASTM E662
Glow Wire Flammability Index 960°C, passes at 6) 3.2 mm IEC 60695-2-12
MECHANICAL 2) 　 　 　
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 3200 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 160 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
Hardness, Rockwell M 　 106 - ISO 2039-2
Tensile Stress, yld, Type I, 50 mm/min 　 115 MPa ASTM D638
Tensile Strain, yld, Type I, 50 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 50 mm/min 　 60 % ASTM D638
Tensile Stress, yld, Type I, 5 mm/min 　 110 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 60 % ASTM D638
Tensile Modulus, 5 mm/min 　 3350 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 165 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3200 MPa ASTM D790
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 160 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 3400 MPa ASTM D790
Hardness, Rockwell M 　 109 - ASTM D785
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy ASTM D1044
IMPACT 2) 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Izod Impact, unnotched, 23°C 　 1600 J/m ASTM D4812
Izod Impact, unnotched, -30°C 　 1500 J/m ASTM D4812
Izod Impact, notched, 23°C 　 32 J/m ASTM D256
Izod Impact, notched, -30°C 　 41 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 1174 J/m ASTM D256
Gardner, 23°C 　 33 J SABIC method
THERMAL 2) 　 　 　
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 209 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 192 °C ISO 75/Af
Vicat Softening Temp, Rate A/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 212 °C ISO 306
CTE, -40°C to 150°C, flow 　 5.20E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 5.20E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASS - IEC 60695-10-2
Thermal Conductivity 　 0.22 W/m-°C ISO 8302
HDT, 0.45 MPa, 6.4 mm, unannealed 　 210 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 201 °C ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed 　 207 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 190 °C ASTM D648
Vicat Softening Temp, Rate B/50 　 211 °C ASTM D1525
CTE, -20°C to 150°C, flow 　 5.20E-05 1/°C ASTM E831
CTE, -20°C to 150°C, xflow 　 5.20E-05 1/°C ASTM E831
Thermal Conductivity 　 0.22 W/m-°C ASTM C177
Relative Temp Index, Elec 　 170 °C UL 746B
Relative Temp Index, Mech w/impact 　 170 °C UL 746B
Relative Temp Index, Mech w/o impact 　 170 °C UL 746B
PHYSICAL 2) 　 　 　
Density 　 1.27 g/cm³ ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs) 　 0.2 % ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium) 　 0.7 % ISO 62-4
Water Absorption, (23°C/24hrs) 　 0.25 % ISO 62-1
Water Absorption, (23°C/saturated) 　 1.25 % ISO 62-1
Melt Volume Rate, MVR at 360°C/5.0 kg 　 25 cm³/10 min ISO 1133
Melt Volume Rate, MVR at 340°C/5.0 kg 　 13 cm³/10 min ISO 1133
Specific Gravity 　 1.27 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.25 % ASTM D570
Water Absorption, (23°C/Saturated) 　 1.25 % ASTM D570
Melt Flow Rate, 337°C/6.6 kgf 　 17.8 g/10 min ASTM D1238
Poisson's Ratio 　 0.36 - ASTM E132
Mold Shrinkage, flow, 3.2 mm 4) 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 4) 0.5-0.7 % SABIC method
ELECTRICAL 2) 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 33 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 25 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 1 MHz 　 0.006 - IEC 60250
Relative Permittivity, 50/60 Hz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0005 - IEC 60250
Dielectric Constant 5) 　 　 　
at 1.1 GHz 　 3.01 - -
at 5 GHz 　 3.02 - -
at 10 GHz 　 3.02 - -
Dissipation Factor 5) 　 　 　
at 1.1 GHz 　 0.0012 - -
at 5 GHz 　 0.0024 - -
at 10 GHz 　 0.0027 - -
Comparative Tracking Index 　 150 V IEC 60112
Comparative Tracking Index, M 　 100 V IEC 60112
Volume Resistivity 　 1.00E+17 Ω.cm ASTM D257
Dielectric Strength, in air, 1.6 mm 　 32.7 kV/mm ASTM D149
Dielectric Strength, in oil, 1.6 mm 　 28 kV/mm ASTM D149
Dielectric Strength, in oil, 3.2 mm 　 19.7 kV/mm ASTM D149
Relative Permittivity, 100 Hz 　 3.15 - ASTM D150
Dissipation Factor, 100 Hz 　 0.0015 - ASTM D150
Relative Permittivity, 1 kHz 　 3.15 - ASTM D150
Dissipation Factor, 1 kHz 　 0.0012 - ASTM D150
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 3) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-410 °C 　
Nozzle Temperature 　 345-405 °C 　
Front - Zone 3 Temperature 　 345-415 °C 　
Middle - Zone 2 Temperature 　 340-405 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-180 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw speed (Circumferential speed) 　 0.2-0.3 m/s 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
EXTRUSION BLOW MOLDING 　 　 　 　
Drying Temperature 　 140-150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.01-0.02 % 　
Melt Temperature (Parison) 　 320-355 °C 　
Barrel - Zone 1 Temperature 　 325-350 °C 　
Barrel - Zone 2 Temperature 　 330-355 °C 　
Barrel - Zone 3 Temperature 　 330-355 °C 　
Barrel - Zone 4 Temperature 　 330-355 °C 　
Adapter - Zone 5 Temperature 　 330-355 °C 　
Head - Zone 6 - Top Temperature 　 330-355 °C 　
Head - Zone 7 - Bottom Temperature 　 330-355 °C 　
Screw Speed 　 10-70 rpm 　
Mold Temperature 　 65-175 °C 　
Die Temperature 　 325-355 °C 　
　 　 　 　 　
1010E 　 　 　 　
ULTEM 1010 Resin is an unreinforced amorphous polyetherimide (PEI) resin that may offer a high glass transition temperature (Tg) of 217°C and improved flow. The material has internal mold release. Features are excellent mechanical, electrical and dimensional properties up to high temperatures. The material may offer very good chemical resistance for an amorphous material. The material is RoHS compliant and the natural, uncolored, material is halogen free according to standards IEC 61249-2-21, IPC 4101E and JEDEC JS709B. For colored variants compliance needs to be checked case by case. The base material is transparent amber colored but is also available in custom colors - transparent and opaque. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.AmericasAsiaEuropeGreater ChinaMEA
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 1) 　 　 　
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 3200 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 160 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
Hardness, Rockwell M 　 106 - ISO 2039-2
Tensile Stress, yld, Type I, 50 mm/min 　 115 MPa ASTM D638
Tensile Strain, yld, Type I, 50 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 50 mm/min 　 60 % ASTM D638
Tensile Stress, yld, Type I, 5 mm/min 　 110 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 60 % ASTM D638
Tensile Modulus, 5 mm/min 　 3350 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 165 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3200 MPa ASTM D790
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 160 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 3400 MPa ASTM D790
Hardness, Rockwell M 　 109 - ASTM D785
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy ASTM D1044
IMPACT 1) 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Izod Impact, unnotched, 23°C 　 1600 J/m ASTM D4812
Izod Impact, unnotched, -30°C 　 1500 J/m ASTM D4812
Izod Impact, notched, 23°C 　 32 J/m ASTM D256
Izod Impact, notched, -30°C 　 41 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 1174 J/m ASTM D256
Gardner, 23°C 　 33 J SABIC method
THERMAL 1) 　 　 　
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 209 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 192 °C ISO 75/Af
Vicat Softening Temp, Rate A/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 212 °C ISO 306
CTE, -40°C to 150°C, flow 　 5.20E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 5.20E-05 1/°C ISO 11359-2
Thermal Conductivity 　 0.22 W/m-°C ISO 8302
HDT, 0.45 MPa, 6.4 mm, unannealed 　 210 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 201 °C ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed 　 207 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 190 °C ASTM D648
Vicat Softening Temp, Rate B/50 　 211 °C ASTM D1525
CTE, -20°C to 150°C, flow 　 5.20E-05 1/°C ASTM E831
CTE, -20°C to 150°C, xflow 　 5.20E-05 1/°C ASTM E831
Thermal Conductivity 　 0.22 W/m-°C ASTM C177
PHYSICAL 1) 　 　 　
Density 　 1.27 g/cm³ ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs) 　 0.2 % ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium) 　 0.7 % ISO 62-4
Water Absorption, (23°C/24hrs) 　 0.25 % ISO 62-1
Water Absorption, (23°C/saturated) 　 1.25 % ISO 62-1
Melt Volume Rate, MVR at 360°C/5.0 kg 　 25 cm³/10 min ISO 1133
Melt Volume Rate, MVR at 340°C/5.0 kg 　 13 cm³/10 min ISO 1133
Specific Gravity 　 1.27 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.25 % ASTM D570
Water Absorption, (23°C/Saturated) 　 1.25 % ASTM D570
Melt Flow Rate, 337°C/6.6 kgf 　 17.8 g/10 min ASTM D1238
Poisson's Ratio 　 0.36 - ASTM E132
Mold Shrinkage, flow, 3.2 mm 3) 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 3) 0.5-0.7 % SABIC method
ELECTRICAL 1) 　 　 　
Dissipation Factor, 1 MHz 　 0.006 - IEC 60250
Relative Permittivity, 50/60 Hz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0005 - IEC 60250
Dielectric Constant 4) 　 　 　
at 1.1 GHz 　 3.01 - -
at 5 GHz 　 3.02 - -
at 10 GHz 　 3.02 - -
Dissipation Factor 4) 　 　 　
at 1.1 GHz 　 0.0012 - -
at 5 GHz 　 0.0024 - -
at 10 GHz 　 0.0027 - -
Relative Permittivity, 100 Hz 　 3.15 - ASTM D150
Dissipation Factor, 100 Hz 　 0.0015 - ASTM D150
Relative Permittivity, 1 kHz 　 3.15 - ASTM D150
Dissipation Factor, 1 kHz 　 0.0012 - ASTM D150
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-410 °C 　
Nozzle Temperature 　 345-405 °C 　
Front - Zone 3 Temperature 　 345-415 °C 　
Middle - Zone 2 Temperature 　 340-405 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-180 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw speed (Circumferential speed) 　 0.2-0.3 m/s 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
EXTRUSION BLOW MOLDING 　 　 　 　
Drying Temperature 　 140-150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.01-0.02 % 　
Melt Temperature (Parison) 　 320-355 °C 　
Barrel - Zone 1 Temperature 　 325-350 °C 　
Barrel - Zone 2 Temperature 　 330-355 °C 　
Barrel - Zone 3 Temperature 　 330-355 °C 　
Barrel - Zone 4 Temperature 　 330-355 °C 　
Adapter - Zone 5 Temperature 　 330-355 °C 　
Head - Zone 6 - Top Temperature 　 330-355 °C 　
Head - Zone 7 - Bottom Temperature 　 330-355 °C 　
Screw Speed 　 10-70 rpm 　
Mold Temperature 　 60-175 °C 　
Die Temperature 　 325-355 °C 　
　 　 　 　 　
1010FC 　 　 　 　
ULTEM 1010FC resin is an amorphous, transparent polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217°C. This inherently flame retardant resin has UL94 V0, V2 and 5VA ratings and is RoHS compliant. ULTEM 1010FC resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures with easy flow. This grade is US FDA and EU Food Contact compliant and has NSF51 listing in selected colors. ULTEM 1010FC resin is not supported with biocompatibility information. For medical applications which require biocompatibility we offer ULTEM HU1010 resin.Europe
1100 　 　 　 　
Standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0, V2 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101048254 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.4 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 85 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 10 % ISO 527
Tensile Modulus, 1 mm/min 　 3500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 140 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.37 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.65 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 12 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 17.2 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Comparative Tracking Index 2) 175 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
1100F 　 　 　 　
Standard flow Polyetherimide (Tg 217C). ECO Conforming. US FDA and EU Food Contact compliant. UL94 V0, V2 and 5VA listing. Effective June 2007, this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU1100.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101048254 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.4 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 85 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 10 % ISO 527
Tensile Modulus, 1 mm/min 　 3500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 140 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.37 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.65 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 12 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 17.2 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Comparative Tracking Index 2) 175 V IEC 60112
Comparative Tracking Index, M 2) 125 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
1110 　 　 　 　
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101048292 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 80 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 10 % ISO 527
Tensile Modulus, 1 mm/min 　 3500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 140 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
Ball Indentation Hardness, H358/30 　 145 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.37 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.65 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 12 cm³/10 min ISO 1133
Melt Volume Rate, MVR at 360°C/5.0 kg 　 21 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 17.2 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Comparative Tracking Index 2) 175 V IEC 60112
Comparative Tracking Index, M 2) 125 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
1110F 　 　 　 　
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA and EU Food Contact compliant, NSF 51 listing. UL94 V0 and 5VA listing. Effective June 2007, this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU1110.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101048269 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.4 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 110 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 80 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 10 % ISO 527
Tensile Modulus, 1 mm/min 　 3500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 140 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
Ball Indentation Hardness, H358/30 　 145 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Density 　 1.36 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.65 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 12 cm³/10 min ISO 1133
Melt Volume Rate, MVR at 360°C/5.0 kg 　 21 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 17.2 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Comparative Tracking Index 2) 175 V IEC 60112
Comparative Tracking Index, M 2) 125 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2100 　 　 　 　
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-102518191 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
UV-light, water exposure/immersion 　 F1 - UL 746C
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 9 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 27 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0009 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0046 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2100F 　 　 　 　
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. US FDA and EU Food Contact Compliant, NSF 51 listing. WRAS certification in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-102518191 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 9 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 ≥1.E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 27 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0009 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0046 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2100R 　 　 　 　
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-100732300 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 9 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 27 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0009 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0046 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2110 　 　 　 　
10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-101082080 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 13 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 27 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0009 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0046 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2110EPR 　 　 　 　
10% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA listing.AsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E207780-100646554 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 119 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 119 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Modulus, 5 mm/min 　 5240 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 199 MPa ASTM D790
Flexural Stress, brk, 2.6 mm/min, 100 mm span 　 193 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 4800 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 5170 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 534 J/m ASTM D4812
Izod Impact, notched, 23°C 　 69 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 350 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 10 J ASTM D3763
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 210 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 210 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 205 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 212 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 207 °C ASTM D648
CTE, -40°C to 40°C, flow 　 3.60E-05 1/°C ASTM E831
CTE, -40°C to 40°C, xflow 　 8.10E-05 1/°C ASTM E831
Relative Temp Index, Elec 1) 155 °C UL 746B
Relative Temp Index, Mech w/impact 1) 155 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 155 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.35 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.7-0.9 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.6-0.8 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 19 g/10 min ASTM D1238
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
Hot-Wire Ignition (HWI), PLC 4 　 ≥0.4 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥0.4 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 3 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
　 　 　 　 　
2110R 　 　 　 　
10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-100732301 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 13 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 27 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0009 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0046 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2200 　 　 　 　
20% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. NSF 51 listing, WRAS certification in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Yellow Card Link 2 　 E121562-502535 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2200F 　 　 　 　
20% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors.EuropeAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 131 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6890 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2200R 　 　 　 　
20% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Yellow Card Link 2 　 E121562-502535 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 480 J/m ASTM D4812
Izod Impact, notched, 23°C 　 90 J/m ASTM D256
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 220 °C ASTM D1525
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.42 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.19 % ASTM D570
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2210 　 　 　 　
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Yellow Card Link 2 　 E121562-502535 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 10 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2210EPR 　 　 　 　
20% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA listing.AsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E207780-104152645 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 137 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 137 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Modulus, 5 mm/min 　 6890 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 206 MPa ASTM D790
Flexural Stress, brk, 2.6 mm/min, 100 mm span 　 206 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 6890 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 6890 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 587 J/m ASTM D4812
Izod Impact, notched, 23°C 　 80 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 14 J ASTM D3763
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 210 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 211 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 206 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 213 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 208 °C ASTM D648
CTE, -40°C to 40°C, flow 　 3.60E-05 1/°C ASTM E831
CTE, -40°C to 40°C, xflow 　 7.20E-05 1/°C ASTM E831
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.39 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 13 g/10 min ASTM D1238
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥0.75 mm UL 746A
Hot-Wire Ignition (HWI), PLC 4 　 ≥0.4 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.4 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
　 　 　 　 　
2210F 　 　 　 　
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors.EuropeAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 10 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2210R 　 　 　 　
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Yellow Card Link 2 　 E121562-502535 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
UV-light, water exposure/immersion 　 F1 - UL 746C
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 475 J/m ASTM D4812
Izod Impact, notched, 23°C 　 74 J/m ASTM D256
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 225 °C ASTM D1525
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.42 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.26 % ASTM D570
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 10 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 ≥1.E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 34 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0008 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0025 - IEC 60250
Dissipation Factor, 2450 MHz 　 0.0049 - IEC 60250
Relative Permittivity, 50/60 Hz 　 3.1 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2212EPR 　 　 　 　
20% Milled glass filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 and 5VA lising.AsiaAmericas
2212R 　 　 　 　
20% Milled glass filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221097 - -
Glow Wire Flammability Index, 1.5 mm 　 960 °C IEC 60695-2-12
Glow Wire Ignitability Temperature, 1.5 mm 　 875 °C IEC 60695-2-13
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, break, 5 mm/min 　 75 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 8 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 135 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
Vicat Softening Temp, Rate B/120 　 211 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 202 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 189 °C ISO 75/Ae
CTE, -40°C to 150°C, flow 　 3.70E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.70E-05 1/°C ISO 11359-2
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.43 g/cm³ ISO 1183
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 7 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2300F (Old to be deleted) 　 　 　 　
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors.EuropeAmericas
2300FC 　 　 　 　
ULTEM 2300FC resin is a standard flow amorphous polyetherimide (PEI) with 30% glass fiber reinforcement. It is offering a glass transition temperature (Tg) of 217°C. This inherently flame retardant resin has UL94 V0 and 5VA ratings and is RoHS compliant. This grade is US FDA and EU Food Contact compliant and has NSF51 listing for selected colors.EuropeAmericas
2300R (OLD to be deleted) 　 　 　 　
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
2310 　 　 　 　
30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221099 - -
UL Yellow Card Link 2 　 E121562-470961 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.2 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
Glow Wire Ignitability Temperature, 2.0 mm 　 900 °C IEC 60695-2-13
Glow Wire Flammability Index, 2.0 mm 　 960 °C IEC 60695-2-12
UV-light, water exposure/immersion 　 F1 - UL 746C
Oxygen Index (LOI) 　 48 % ISO 4589
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-410 °C 　
Nozzle Temperature 　 345-410 °C 　
Front - Zone 3 Temperature 　 345-420 °C 　
Middle - Zone 2 Temperature 　 340-410 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 135-180 °C 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
Screw speed (Circumferential speed) 　 0.15-0.25 m/s 　
Screw Speed 　 40-70 rpm 　
Back Pressure 　 0.3-1.5 MPa 　
ELECTRICAL 3) 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 50/60 Hz 　 3.3 - IEC 60250
Relative Permittivity, 1 MHz 　 3.4 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0023 - IEC 60250
Dielectric Constant 6) 　 　 　
at 1.1 GHz 　 3.51 - -
at 5 GHz 　 3.59 - -
at 10 GHz 　 3.6 - -
Dissipation Factor 6) 　 　 　
at 1.1 GHz 　 0.0029 - -
at 5 GHz 　 0.0036 - -
at 10 GHz 　 0.0046 - -
Comparative Tracking Index 4) 150 V IEC 60112
Comparative Tracking Index, M 4) 100 V IEC 60112
Volume Resistivity 　 3.00E+16 Ω.cm ASTM D257
Dielectric Strength, in air, 1.6 mm 　 24.8 kV/mm ASTM D149
Dielectric Strength, in oil, 1.6 mm 　 30.3 kV/mm ASTM D149
Relative Permittivity, 1 kHz 　 3.7 - ASTM D150
Dissipation Factor, 1 kHz 　 0.0015 - ASTM D150
Comparative Tracking Index (UL) {PLC} 1) 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 1) ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 1) ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 1) ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 1) ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 1) 3 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 1) 6 PLC Code ASTM D495
PHYSICAL 3) 　 　 　
Density 　 1.51 g/cm³ ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs) 　 0.1 % ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium) 　 0.6 % ISO 62-4
Water Absorption, (23°C/24hrs) 　 0.16 % ISO 62-1
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Melt Volume Rate, MVR at 360°C/5.0 kg 　 8 cm³/10 min ISO 1133
Specific Gravity 　 1.51 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.16 % ASTM D570
Water Absorption, (23°C/Saturated) 　 0.9 % ASTM D570
Melt Flow Rate, 337°C/6.6 kgf 　 7.6 g/10 min ASTM D1238
Mold Shrinkage, flow, 3.2 mm 5) 0.2-0.4 % SABIC method
THERMAL 3) 　 　 　
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 215 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 210 °C ISO 75/Af
Vicat Softening Temp, Rate A/50 　 225 °C ISO 306
Vicat Softening Temp, Rate B/120 　 220 °C ISO 306
Vicat Softening Temp, Rate B/50 　 213 °C ISO 306
CTE, -40°C to 150°C, flow 　 1.80E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.80E-05 1/°C ISO 11359-2
Thermal Conductivity 　 0.31 W/m-°C ISO 8302
Ball Pressure Test, 125°C +/- 2°C 　 PASS - IEC 60695-10-2
HDT, 0.45 MPa, 3.2 mm, unannealed 　 215 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 212 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 211 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 210 °C ASTM D648
CTE, -20°C to 150°C, flow 　 1.80E-05 1/°C ASTM E831
CTE, -20°C to 150°C, xflow 　 4.80E-05 1/°C ASTM E831
Relative Temp Index, Elec 1) 180 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 180 °C UL 746B
IMPACT 3) 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 10 kJ/m² ISO 180/1A
Izod Impact, unnotched 80*10*4 +23°C 　 40 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 40 kJ/m² ISO 180/1U
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Izod Impact, notched, 23°C 　 90 J/m ASTM D256
Izod Impact, notched, -30°C 　 80 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 470 J/m ASTM D256
Izod Impact, unnotched, 23°C 　 600 J/m ASTM D4812
Izod Impact, unnotched, -30°C 　 600 J/m ASTM D4812
MECHANICAL 3) 　 　 　
Tensile Stress, break, 5 mm/min 　 175 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2.4 % ISO 527
Tensile Modulus, 1 mm/min 　 10500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 9600 MPa ISO 178
Ball Indentation Hardness, H358/30 　 165 MPa ISO 2039-1
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Hardness, Rockwell M 　 110 - ISO 2039-2
Tensile Stress, brk, Type I, 5 mm/min 　 175 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2.5 % ASTM D638
Tensile Modulus, 5 mm/min 　 10400 MPa ASTM D638
Flexural Stress, brk, 2.6 mm/min, 100 mm span 　 230 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 9400 MPa ASTM D790
Flexural Stress, brk, 1.3 mm/min, 50 mm span 　 250 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 9700 MPa ASTM D790
Hardness, Rockwell M 　 114 - ASTM D785
　 　 　 　 　
2310EPR 　 　 　 　
30% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221095 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
ELECTRICAL 1) 3) 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥0.75 mm UL 746A
Hot-Wire Ignition (HWI), PLC 4 　 ≥0.4 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.4 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
THERMAL 3) 　 　 　
Vicat Softening Temp, Rate B/50 　 217 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 205 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 201 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 208 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 205 °C ASTM D648
CTE, -40°C to 150°C, flow 　 1.80E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 3.00E-05 1/°C ASTM E831
Thermal Conductivity 　 0.31 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.80E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 3.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASS - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 214 °C ISO 306
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 207 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 196 °C ISO 75/Af
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
IMPACT 3) 　 　 　
Izod Impact, unnotched, 23°C 　 450 J/m ASTM D4812
Izod Impact, notched, 23°C 　 85 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 9 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 10 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 30 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
MECHANICAL 3) 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 158 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 158 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 2.1 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2.1 % ASTM D638
Tensile Modulus, 5 mm/min 　 8580 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 228 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 9140 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 160 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 160 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 2 % ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 8970 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 9500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 160 MPa ISO 2039-1
PHYSICAL 　 　 　 　
Specific Gravity 　 1.48 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 4) 0.3-0.5 % SABIC method
Mold Shrinkage, flow, 3.2 mm 4) 0.4-0.6 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.4-0.6 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 11 g/10 min ASTM D1238
Density 　 1.48 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.5 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 12 cm³/10 min ISO 1133
　 　 　 　 　
2310F (old to be deleted) 　 　 　 　
30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors.EuropeAmericas
2310R (old to be deleted) 　 　 　 　
30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
2312 　 　 　 　
30% Milled glass filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221100 - -
Glow Wire Flammability Index, 1.5 mm 　 960 °C IEC 60695-2-12
Glow Wire Ignitability Temperature, 1.5 mm 　 875 °C IEC 60695-2-13
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.81 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, break, 5 mm/min 　 85 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 3 % ISO 527
Tensile Modulus, 1 mm/min 　 6000 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 145 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 160 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 -40°C 　 5 kJ/m² ISO 180/1A
Izod Impact, unnotched 80*10*4 +23°C 　 20 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 20 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 4 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 25 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 25 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.3 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 2.30E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 2.70E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 220 °C ISO 306
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 213 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 206 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 192 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.2-0.4 % SABIC method
Density 　 1.51 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.5 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 12 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Relative Permittivity, 1 MHz 　 3.4 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.81 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.81 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 0 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 7 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2312EPR 　 　 　 　
30% Milled glass filled, high flow Polyetherimide (Tg 217C) with internal mold release and enhanced electroplatability. ECO Conforming, UL94 V0 listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221101 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 94 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 94 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 2 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2 % ASTM D638
Tensile Modulus, 5 mm/min 　 6480 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 156 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 5580 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 80 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 80 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 2 % ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 5300 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 145 MPa ISO 178
Flexural Modulus, 2 mm/min 　 5500 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 330 J/m ASTM D4812
Izod Impact, notched, 23°C 　 39 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 15 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 25 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 25 kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 5 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 25 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 25 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 216 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 204 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 199 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 206 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 202 °C ASTM D648
CTE, -40°C to 150°C, flow 　 3.20E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 3.50E-05 1/°C ASTM E831
Thermal Conductivity 　 0.32 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 3.70E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 3.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 213 °C ISO 306
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 204 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 192 °C ISO 75/Af
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.48 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.4-0.6 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.4-0.6 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 13.7 g/10 min ASTM D1238
Density 　 1.48 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.5 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 14 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥0.75 mm UL 746A
Hot-Wire Ignition (HWI), PLC 4 　 ≥0.4 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.4 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
2400 　 　 　 　
40% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. WRAS certification in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221103 - -
UL Yellow Card Link 2 　 E45587-236985 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
Glow Wire Ignitability Temperature, 1.5 mm 　 875 °C IEC 60695-2-13
Glow Wire Ignitability Temperature, 1.0 mm 　 850 °C IEC 60695-2-13
Glow Wire Flammability Index, 1.5 mm 　 960 °C IEC 60695-2-12
Glow Wire Flammability Index, 1.0 mm 　 960 °C IEC 60695-2-12
Oxygen Index (LOI) 2) 54 % ASTM D2863
NBS Smoke Density, Flaming, Ds 4 min 2) 1 - ASTM E662
Oxygen Index (LOI) 2) 48 % ISO 4589
MECHANICAL 2) 　 　 　
Tensile Stress, brk, Type I, 5 mm/min 　 179 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2.5 % ASTM D638
Tensile Modulus, 5 mm/min 　 11720 MPa ASTM D638
Flexural Stress, brk, 2.6 mm/min, 100 mm span 　 241 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 11720 MPa ASTM D790
Hardness, Rockwell M 　 114 - ASTM D785
Tensile Stress, break, 5 mm/min 　 180 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 11500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 10000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 170 MPa ISO 2039-1
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
IMPACT 2) 　 　 　
Izod Impact, notched, 23°C 　 112 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 480 J/m ASTM D256
Izod Impact, unnotched, 23°C 　 427 J/m ASTM D4812
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Charpy 　 　 　 　
23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
-30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
THERMAL 2) 　 　 　
Vicat Softening Temp, Rate B/50 　 234 °C ASTM D1525
HDT, 0.45 MPa, 6.4 mm, unannealed 　 215 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 212 °C ASTM D648
CTE, -20°C to 150°C, flow 　 1.40E-05 1/°C ASTM E831
Thermal Conductivity 　 0.33 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.40E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 230 °C ISO 306
Vicat Softening Temp, Rate B/50 　 217 °C ISO 306
Vicat Softening Temp, Rate B/120 　 225 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 2) 　 　 　
Specific Gravity 　 1.61 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.13 % ASTM D570
Water Absorption, (23°C/Saturated) 　 0.9 % ASTM D570
Melt Flow Rate, 337°C/6.6 kgf 　 4.2 g/10 min ASTM D1238
Mold Shrinkage, flow, 3.2 mm 4) 0.1-0.3 % SABIC method
Mold Shrinkage on Tensile Bar, flow 4) 0.1-0.3 % SABIC method
Density 　 1.61 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.8 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.4 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 5 cm³/10 min ISO 1133
ELECTRICAL 2) 　 　 　
Volume Resistivity 　 1.50E+16 Ω.cm ASTM D257
Dielectric Strength, in oil, 1.6 mm 　 24 kV/mm ASTM D149
Relative Permittivity, 1 kHz 　 3.7 - ASTM D150
Dissipation Factor, 1 kHz 　 0.002 - ASTM D150
Comparative Tracking Index (UL) {PLC} 1) 5 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 1) ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 1) ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 1) 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.1 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0025 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0019 - IEC 60250
Comparative Tracking Index 　 150 V IEC 60112
Comparative Tracking Index, M 　 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
INJECTION MOLDING 3) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
2400F 　 　 　 　
40% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Resin is RoHS compliant. UL94 V0 listing. US FDA and European Food Contact approved. Effective June, 2007 this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU2400.Europe
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221103 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
Glow Wire Ignitability Temperature, 1.5 mm 　 875 °C IEC 60695-2-13
Glow Wire Ignitability Temperature, 1.0 mm 　 850 °C IEC 60695-2-13
Glow Wire Flammability Index, 1.5 mm 　 960 °C IEC 60695-2-12
Glow Wire Flammability Index, 1.0 mm 　 960 °C IEC 60695-2-12
Oxygen Index (LOI) 　 48 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 180 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 11500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 10000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 170 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.33 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.40E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 230 °C ISO 306
Vicat Softening Temp, Rate B/50 　 217 °C ISO 306
Vicat Softening Temp, Rate B/120 　 225 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.1-0.3 % SABIC method
Density 　 1.61 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.8 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.4 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 5 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.1 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0025 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0019 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 5 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 370-410 °C 　
Front - Zone 3 Temperature 　 380-420 °C 　
Middle - Zone 2 Temperature 　 370-410 °C 　
Rear - Zone 1 Temperature 　 350-390 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2410 　 　 　 　
40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221104 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
Glow Wire Flammability Index 960°C, passes at 　 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 48 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 180 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 11500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 10000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 170 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.29 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 1.40E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 230 °C ISO 306
Vicat Softening Temp, Rate B/50 　 217 °C ISO 306
Vicat Softening Temp, Rate B/120 　 225 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.1-0.3 % SABIC method
Density 　 1.61 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.8 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.4 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.1 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0025 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0019 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 5 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 370-410 °C 　
Front - Zone 3 Temperature 　 380-420 °C 　
Middle - Zone 2 Temperature 　 370-410 °C 　
Rear - Zone 1 Temperature 　 350-390 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
2410EPR 　 　 　 　
40% Glass fiber filled, high flow Polyetherimide (Tg 217C) with internal mold release for enhanced electroplatability. ECO Conforming, UL94 V0 listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221105 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 165 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 165 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 1.8 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 1.8 % ASTM D638
Tensile Modulus, 5 mm/min 　 11100 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 240 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 10650 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 170 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 170 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 2 % ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 11000 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 220 MPa ISO 178
Flexural Modulus, 2 mm/min 　 9500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 165 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 410 J/m ASTM D4812
Izod Impact, notched, 23°C 　 82 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 18 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 10 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 30 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 223 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 212 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 204 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 215 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 208 °C ASTM D648
CTE, -40°C to 150°C, flow 　 1.50E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 4.50E-05 1/°C ASTM E831
Thermal Conductivity 　 0.3 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.50E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 214 °C ISO 306
Vicat Softening Temp, Rate B/120 　 215 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 208 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 206 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 197 °C ISO 75/Af
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.56 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.2-0.4 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.2-0.4 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.3-0.5 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 8.9 g/10 min ASTM D1238
Density 　 1.56 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.8 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.4 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 11 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥0.75 mm UL 746A
Hot-Wire Ignition (HWI), PLC 4 　 ≥0.4 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.4 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
2410R 　 　 　 　
40% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221104 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.25 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 48 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 180 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 11500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 10000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 170 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 427 J/m ASTM D4812
Izod Impact, notched, 23°C 　 112 J/m ASTM D256
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 234 °C ASTM D1525
Thermal Conductivity 　 0.33 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.40E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 230 °C ISO 306
Vicat Softening Temp, Rate B/50 　 217 °C ISO 306
Vicat Softening Temp, Rate B/120 　 225 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.61 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.13 % ASTM D570
Mold Shrinkage on Tensile Bar, flow 　 0.1-0.3 % SABIC method
Density 　 1.61 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.8 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.4 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.1 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0025 - IEC 60250
Dissipation Factor, 1 kHz 　 0.002 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0019 - IEC 60250
Relative Permittivity, 50/60 Hz 　 3.5 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 5 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 370-410 °C 　
Front - Zone 3 Temperature 　 380-420 °C 　
Middle - Zone 2 Temperature 　 370-410 °C 　
Rear - Zone 1 Temperature 　 350-390 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
3452 　 　 　 　
45% Glass fiber and mineral filled, enhanced flow Polyetherimide (Tg 217C) with enhanced dimensional stability. ECO Conforming, UL94 V0 and 5VA listing in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221107 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.77 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, break, 50 mm/min 　 100 MPa ISO 527
Tensile Strain, break, 50 mm/min 　 1.5 % ISO 527
Tensile Modulus, 1 mm/min 　 12500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 150 MPa ISO 178
Flexural Modulus, 2 mm/min 　 12000 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 14 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 13 kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 14 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 14 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
CTE, -40°C to 150°C, flow 　 1.90E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 3.60E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/50 　 205 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 207 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Ae
Relative Temp Index, Elec 1) 180 °C UL 746B
Relative Temp Index, Mech w/impact 1) 180 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 180 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.25 % SABIC method
Density 　 1.66 g/cm³ ISO 1183
Melt Volume Rate, MVR at 360°C/5.0 kg 　 8 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 >1.E+13 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.6 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.01 - IEC 60250
Dissipation Factor, 1 MHz 　 0.015 - IEC 60250
Comparative Tracking Index 2) 125 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.7 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
4000 　 　 　 　
Glass fiber, PTFE, and Graphite filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221109 - -
UL Recognized, 94V-0 Flame Class Rating 　 0.84 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 48 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 30 mg/1000cy SABIC method
PV Limit, 0.51 m/s 　 2.1 MPa-m/s SABIC method
K-factor xE-10, PV=2000 psi-fpm vs Steel 　 50 - SABIC method
K-factor xE-10, PV=2000 psi-fpm vs Self 　 1900 - SABIC method
Tensile Stress, break, 5 mm/min 　 90 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 1 % ISO 527
Tensile Modulus, 1 mm/min 　 9900 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 120 MPa ISO 178
Flexural Modulus, 2 mm/min 　 7000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 15 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 15 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 8 kJ/m² ISO 179/2C
Charpy Impact, notched, -30°C 　 8 kJ/m² ISO 179/2C
THERMAL 　 　 　 　
Thermal Conductivity 　 0.43 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.50E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 225 °C ISO 306
Vicat Softening Temp, Rate B/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/120 　 220 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.1-0.3 % SABIC method
Density 　 1.68 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.7 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.3 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 5 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Relative Permittivity, 1 MHz 　 6.2 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.013 - IEC 60250
Dissipation Factor, 1 MHz 　 0.022 - IEC 60250
Comparative Tracking Index 2) 200 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 6.8 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-415 °C 　
Nozzle Temperature 　 360-405 °C 　
Front - Zone 3 Temperature 　 370-415 °C 　
Middle - Zone 2 Temperature 　 360-405 °C 　
Rear - Zone 1 Temperature 　 350-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
4001 　 　 　 　
PTFE filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221110 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.38 mm UL 94
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.5 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 48 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 2 mg/1000cy SABIC method
PV Limit, 0.51 m/s 　 1.9 MPa-m/s SABIC method
Tensile Stress, yield, 50 mm/min 　 95 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 75 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 30 % ISO 527
Tensile Modulus, 1 mm/min 　 3000 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 125 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3000 MPa ISO 178
Ball Indentation Hardness, H358/30 　 130 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 8 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 11 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 9 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 3.90E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/50 　 208 °C ISO 306
Vicat Softening Temp, Rate B/120 　 210 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 190 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.6-0.8 % SABIC method
Density 　 1.33 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 13 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥0.38 mm UL 746A
High Amp Arc Ignition (HAI), PLC 0 　 ≥1.6 mm UL 746A
High Amp Arc Ignition (HAI), PLC 1 　 ≥0.38 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
4002 　 　 　 　
PTFE filled, standard flow Polyetherimide (Tg 217C). ECO Conforming, UL 94 V0 and 5VA listing in recognized colors.Americas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221111 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.38 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 105 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 85 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 5 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 40 % ASTM D638
Tensile Modulus, 5 mm/min 　 3460 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 155 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3550 MPa ASTM D790
Tensile Stress, yield, 50 mm/min 　 100 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 80 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 25 % ISO 527
Tensile Modulus, 1 mm/min 　 3300 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 130 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3100 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 117 J/m ASTM D256
Izod Impact, notched, -30°C 　 120 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 380 J ASTM D3763
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 8 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 11 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 219 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 197 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 200 °C ASTM D648
CTE, -40°C to 150°C, flow 　 3.90E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 4.00E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 3.90E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/120 　 210 °C ISO 306
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 190 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.33 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.6-0.8 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 9.5 g/10 min ASTM D1238
Density 　 1.33 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 13 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.6 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥1.6 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 135 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 10 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-370 °C 　
Nozzle Temperature 　 350-370 °C 　
Front - Zone 3 Temperature 　 350-370 °C 　
Middle - Zone 2 Temperature 　 345-365 °C 　
Rear - Zone 1 Temperature 　 340-360 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
4211 　 　 　 　
20% Glass fiber filled and PTFE filled, standard flow Polyetherimide (Tg 217C). ECO Conforming.AsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-524104 - -
UL Recognized, 94V-0 Flame Class Rating 　 1.5 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 129 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 3 % ASTM D638
Flexural Stress, brk, 2.6 mm/min, 100 mm span 　 193 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 7100 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, Reverse Notched, 3.2 mm 　 437 J/m ASTM D256
THERMAL 　 　 　 　
HDT, 1.82 MPa, 6.4 mm, unannealed 　 212 °C ASTM D648
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.48 - ASTM D792
Melt Flow Rate, 337°C/6.6 kgf 　 10.3 g/10 min ASTM D1238
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 135 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 10 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-370 °C 　
Nozzle Temperature 　 350-370 °C 　
Front - Zone 3 Temperature 　 350-370 °C 　
Middle - Zone 2 Temperature 　 345-365 °C 　
Rear - Zone 1 Temperature 　 340-360 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
6202 　 　 　 　
12% Silica filled, standard flow Polyetherimide Copolymer (Tg 235C). ECO Conforming, UL94 VO Listing.EuropeAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221112 - -
UL Recognized, 94V-0 Flame Class Rating 　 1.5 mm UL 94
Oxygen Index (LOI) 　 48 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 35 mg/1000cy SABIC method
Tensile Stress, yield, 5 mm/min 　 90 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 90 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 5 % ISO 527
Tensile Strain, break, 5 mm/min 　 7 % ISO 527
Tensile Modulus, 1 mm/min 　 3700 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 150 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3800 MPa ISO 178
Ball Indentation Hardness, H358/30 　 160 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 40 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 45 kJ/m² ISO 180/1U
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 50 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 25 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, 23°C to 80°C, flow 　 4.50E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, flow 　 4.50E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.50E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/50 　 222 °C ISO 306
Vicat Softening Temp, Rate B/120 　 225 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 202 °C ISO 75/Ae
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Density 　 1.36 g/cm³ ISO 1183
Melt Volume Rate, MVR at 360°C/5.0 kg 　 8 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 >1.E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 1.6 mm 　 21 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 17 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.8 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.004 - IEC 60250
Dissipation Factor, 1 MHz 　 0.003 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Relative Permittivity, 50/60 Hz 　 2.9 - IEC 60250
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
9075 　 　 　 　
High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 90 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 75 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 25 % ISO 527
Tensile Modulus, 1 mm/min 　 3200 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 130 MPa ISO 178
Flexural Stress, break, 2 mm/min 　 120 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3200 MPa ISO 178
Ball Indentation Hardness, H358/30 　 127 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 7 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 7 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 6 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 200 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.6-0.8 % SABIC method
Density 　 1.32 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.25 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.7 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 15 cm³/10 min ISO 1133
FLAME CHARACTERISTICS 　 　 　 　
UL Compliant, 94V-0 Flame Class Rating 　 1.6 mm UL 94 by SABIC-IP
OSU total heat release (2 minute test) 　 10 kW-min/m² FAR 25.853
OSU peak heat release rate (5 minute test) 　 16 kW/m² FAR 25.853
Glow Wire Flammability Index 960°C, passes at 　 3.2 mm IEC 60695-2-12
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 135-145 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-370 °C 　
Nozzle Temperature 　 350-370 °C 　
Front - Zone 3 Temperature 　 350-370 °C 　
Middle - Zone 2 Temperature 　 345-365 °C 　
Rear - Zone 1 Temperature 　 340-360 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
PROFILE EXTRUSION 　 　 　 　
Drying Temperature 　 130-140 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 295-330 °C 　
Barrel - Zone 1 Temperature 　 280-300 °C 　
Barrel - Zone 2 Temperature 　 295-320 °C 　
Barrel - Zone 3 Temperature 　 305-330 °C 　
Barrel - Zone 4 Temperature 　 310-335 °C 　
Hopper Temperature 　 80-100 °C 　
Adapter Temperature 　 285-335 °C 　
Die Temperature 　 275-330 °C 　
Calibrator Temperature 　 140-170 °C 　
Calibrator 2 Temperature 　 90-130 °C 　
　 　 　 　 　
9085 　 　 　 　
High flow Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke and flame evolution.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 1) 　 　 　
Tensile Stress, yld, Type I, 50 mm/min 　 94 MPa ASTM D638
Tensile Strain, yld, Type I, 50 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 50 mm/min 　 70 % ASTM D638
Tensile Stress, yld, Type I, 5 mm/min 　 86 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 70 % ASTM D638
Tensile Modulus, 5 mm/min 　 3000 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 138 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 2800 MPa ASTM D790
Tensile Stress, yield, 50 mm/min 　 94 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6.7 % ISO 527
Tensile Strain, break, 50 mm/min 　 70 % ISO 527
Tensile Stress, yield, 5 mm/min 　 88 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 6.5 % ISO 527
Tensile Strain, break, 5 mm/min 　 70 % ISO 527
Tensile Modulus, 1 mm/min 　 2850 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 129 MPa ISO 178
Flexural Modulus, 2 mm/min 　 2700 MPa ISO 178
Hardness, Rockwell M 　 115 - ISO 2039-2
IMPACT 1) 　 　 　
Izod Impact, unnotched, 23°C 　 NB J/m ASTM D4812
Izod Impact, unnotched, -30°C 　 NB J/m ASTM D4812
Izod Impact, notched, 23°C 　 115 J/m ASTM D256
Izod Impact, notched, -30°C 　 65 J/m ASTM D256
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 8 kJ/m² ISO 180/1A
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 8 kJ/m² ISO 179/1eA
PHYSICAL 1) 　 　 　
Specific Gravity 　 1.34 - ASTM D792
Melt Flow Rate, 295°C/6.6 kgf 　 8.9 g/10 min ASTM D1238
Density 　 1.34 g/cm³ ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs) 　 0.1 % ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium) 　 0.4 % ISO 62-4
Water Absorption, (23°C/24hrs) 　 0.15 % ISO 62-1
Water Absorption, (23°C/saturated) 　 0.7 % ISO 62-1
Melt Volume Rate, MVR at 340°C/5.0 kg 　 40 cm³/10 min ISO 1133
Mold Shrinkage, flow, 3.2 mm 3) 0.5-0.7 % SABIC method
FLAME CHARACTERISTICS 1) 　 　 　
FAA Flammability, FAR 25.853 A/B 　 <5 - FAR 25.853
OSU total heat release (2 minute test) 　 ≤55 kW-min/m² FAR 25.853
OSU peak heat release rate (5 minute test) 　 ≤55 kW/m² FAR 25.853
Vertical Burn at 60 Seconds 4) PASS - FAR 25.853
Oxygen Index (LOI) 　 49 % ASTM D2863
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 120-130 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 330-350 °C 　
Nozzle Temperature 　 330-350 °C 　
Front - Zone 3 Temperature 　 330-350 °C 　
Middle - Zone 2 Temperature 　 325-345 °C 　
Rear - Zone 1 Temperature 　 315-340 °C 　
Mold Temperature 　 120-150 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw speed (Circumferential speed) 　 0.2-0.3 m/s 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
THERMAL 　 　 　 　
HDT, 0.45 MPa, 3.2 mm, unannealed 　 169 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 153 °C ASTM D648
CTE, -30°C to 80°C, flow 　 6.50E-05 1/°C ASTM E831
CTE, -30°C to 80°C, xflow 　 7.00E-05 1/°C ASTM E831
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 169 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 152 °C ISO 75/Af
Vicat Softening Temp, Rate B/50 　 173 °C ISO 306
Vicat Softening Temp, Rate B/120 　 175 °C ISO 306
CTE, -30°C to 80°C, flow 　 6.50E-05 1/°C ISO 11359-2
CTE, -30°C to 80°C, xflow 　 7.00E-05 1/°C ISO 11359-2
PROFILE EXTRUSION 　 　 　 　
Drying Temperature 　 120-130 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 280-310 °C 　
Barrel - Zone 1 Temperature 　 265-275 °C 　
Barrel - Zone 2 Temperature 　 280-295 °C 　
Barrel - Zone 3 Temperature 　 290-305 °C 　
Barrel - Zone 4 Temperature 　 295-310 °C 　
Hopper Temperature 　 80-100 °C 　
Adapter Temperature 　 270-310 °C 　
Die Temperature 　 260-310 °C 　
Calibrator Temperature 　 130-160 °C 　
Calibrator 2 Temperature 　 80-120 °C 　
　 　 　 　 　
9090 　 　 　 　
Polyetherimide Blend with improved Ductility and Detergent resistance. Meets FAR 25.853 and OSU 55/55 heat release and provides low toxicity, smoke and flame evolution.EuropeAmericas
AR9100 　 　 　 　
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.AsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 110 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 119 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 8 % ASTM D638
Tensile Modulus, 5 mm/min 　 4340 MPa ASTM D638
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 193 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 5030 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 69 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 480 J/m ASTM D256
THERMAL 　 　 　 　
HDT, 1.82 MPa, 6.4 mm, unannealed 　 207 °C ASTM D648
PHYSICAL 　 　 　 　
Specific Gravity 　 1.32 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.6 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 6.9 g/10 min ASTM D1238
FLAME CHARACTERISTICS 　 　 　 　
FAA Flammability, FAR 25.853 A/B 　 NATURAL - FAR 25.853
OSU total heat release (2 minute test) 　 5 kW-min/m² FAR 25.853
OSU peak heat release rate (5 minute test) 　 40 kW/m² FAR 25.853
Vertical Burn a (60s) passes at 　 0 Seconds FAR 25.853
Vertical Burn b (12s) passes at 　 0 Seconds FAR 25.853
NBS Smoke Density, Flaming, Dmax 　 5 - ASTM E662
NBS Smoke Density, Flaming, Ds 1.5 min 　 0 - ASTM E662
NBS Smoke Density, Flaming, Ds 4 min 　 5 - ASTM E662
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 365-390 °C 　
Nozzle Temperature 　 360-380 °C 　
Front - Zone 3 Temperature 　 365-390 °C 　
Middle - Zone 2 Temperature 　 355-375 °C 　
Rear - Zone 1 Temperature 　 345-365 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
AR9110 　 　 　 　
10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.Americas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 106 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 102 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 8 % ASTM D638
Tensile Modulus, 5 mm/min 　 4480 MPa ASTM D638
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 188 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 4820 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 58 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 395 J/m ASTM D256
THERMAL 　 　 　 　
HDT, 1.82 MPa, 6.4 mm, unannealed 　 207 °C ASTM D648
PHYSICAL 　 　 　 　
Specific Gravity 　 1.4 - ASTM D792
Melt Flow Rate, 337°C/6.6 kgf 　 12.5 g/10 min ASTM D1238
FLAME CHARACTERISTICS 　 　 　 　
FAA Flammability, FAR 25.853 A/B 　 NATURAL - FAR 25.853
OSU total heat release (2 minute test) 　 6 kW-min/m² FAR 25.853
OSU peak heat release rate (5 minute test) 　 36 kW/m² FAR 25.853
NBS Smoke Density, Flaming, Dmax 　 5 - ASTM E662
NBS Smoke Density, Flaming, Ds 1.5 min 　 0 - ASTM E662
NBS Smoke Density, Flaming, Ds 4 min 　 5 - ASTM E662
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 365-390 °C 　
Nozzle Temperature 　 360-380 °C 　
Front - Zone 3 Temperature 　 365-390 °C 　
Middle - Zone 2 Temperature 　 355-375 °C 　
Rear - Zone 1 Temperature 　 345-365 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
AR9200 　 　 　 　
20% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.AsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, brk, Type I, 5 mm/min 　 151 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Modulus, 5 mm/min 　 6960 MPa ASTM D638
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 206 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 7230 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 101 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 534 J/m ASTM D256
THERMAL 　 　 　 　
HDT, 1.82 MPa, 6.4 mm, unannealed 　 211 °C ASTM D648
PHYSICAL 　 　 　 　
Specific Gravity 　 1.4 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.3-0.5 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 5.7 g/10 min ASTM D1238
FLAME CHARACTERISTICS 　 　 　 　
FAA Flammability, FAR 25.853 A/B 　 NATURAL - FAR 25.853
OSU total heat release (2 minute test) 　 5 kW-min/m² FAR 25.853
OSU peak heat release rate (5 minute test) 　 40 kW/m² FAR 25.853
Vertical Burn a (60s) passes at 　 0 Seconds FAR 25.853
Vertical Burn b (12s) passes at 　 0 Seconds FAR 25.853
NBS Smoke Density, Flaming, Dmax 　 5 - ASTM E662
NBS Smoke Density, Flaming, Ds 1.5 min 　 0 - ASTM E662
NBS Smoke Density, Flaming, Ds 4 min 　 5 - ASTM E662
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 365-390 °C 　
Nozzle Temperature 　 360-380 °C 　
Front - Zone 3 Temperature 　 365-390 °C 　
Middle - Zone 2 Temperature 　 355-375 °C 　
Rear - Zone 1 Temperature 　 345-365 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
AR9300 　 　 　 　
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, break, 5 mm/min 　 165 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 9500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 225 MPa ISO 178
Flexural Modulus, 2 mm/min 　 8500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 160 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.29 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 1.70E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.20E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 220 °C ISO 306
Vicat Softening Temp, Rate B/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/120 　 215 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 212 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 208 °C ISO 75/Ae
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.2-0.4 % SABIC method
Density 　 1.49 g/cm³ ISO 1183
Melt Volume Rate, MVR at 360°C/5.0 kg 　 6 cm³/10 min ISO 1133
FLAME CHARACTERISTICS 　 　 　 　
OSU total heat release (2 minute test) 　 5 kW-min/m² FAR 25.853
OSU peak heat release rate (5 minute test) 　 40 kW/m² FAR 25.853
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 350-410 °C 　
Front - Zone 3 Temperature 　 350-410 °C 　
Middle - Zone 2 Temperature 　 350-400 °C 　
Rear - Zone 1 Temperature 　 350-370 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 135-140 °C 　
　 　 　 　 　
ATX200 　 　 　 　
High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E45329-100397331 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.75 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 85 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 70 % ASTM D638
Tensile Modulus, 5 mm/min 　 3300 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 145 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3170 MPa ASTM D790
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 95 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 75 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6.5 % ISO 527
Tensile Strain, break, 50 mm/min 　 20 % ISO 527
Tensile Modulus, 1 mm/min 　 3000 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 125 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3100 MPa ISO 178
Ball Indentation Hardness, H358/30 　 125 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 2082 J/m ASTM D4812
Izod Impact, notched, 23°C 　 53 J/m ASTM D256
Izod Impact, notched, -30°C 　 55 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 2136 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 50 J ASTM D3763
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 209 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 187 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 190 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.00E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.00E-05 1/°C ASTM E831
Thermal Conductivity 　 0.23 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 195 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 180 °C ISO 75/Ae
Relative Temp Index, Elec 1) 115 °C UL 746B
Relative Temp Index, Mech w/impact 1) 115 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 115 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.26 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 24 g/10 min ASTM D1238
Density 　 1.26 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.5 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 16 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.001 - IEC 60250
Dissipation Factor, 1 MHz 　 0.005 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Relative Permittivity, 50/60 Hz 　 2.9 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 130-140 °C 　
Drying Time 　 3月4日 Hrs 　
Melt Temperature 　 340-380 °C 　
Nozzle Temperature 　 340-360 °C 　
Front - Zone 3 Temperature 　 340-360 °C 　
Middle - Zone 2 Temperature 　 330-350 °C 　
Rear - Zone 1 Temperature 　 320-340 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 125-140 °C 　
　 　 　 　 　
ATX200F 　 　 　 　
High flow Polyetherimide blend. ECO Conforming, UL94 V0 Listing. US FDA Food Contact compliant.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E45329-100397331 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.75 mm UL 94
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 95 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 75 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6.5 % ISO 527
Tensile Strain, break, 50 mm/min 　 20 % ISO 527
Tensile Modulus, 1 mm/min 　 3000 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 125 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3100 MPa ISO 178
Ball Indentation Hardness, H358/30 　 125 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Thermal Conductivity 　 0.23 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 6.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 6.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 195 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 180 °C ISO 75/Ae
Relative Temp Index, Elec 1) 115 °C UL 746B
Relative Temp Index, Mech w/impact 1) 115 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 115 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Density 　 1.27 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.5 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 16 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.001 - IEC 60250
Dissipation Factor, 1 MHz 　 0.005 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Relative Permittivity, 50/60 Hz 　 2.9 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 130-140 °C 　
Drying Time 　 3月4日 Hrs 　
Melt Temperature 　 340-380 °C 　
Nozzle Temperature 　 340-360 °C 　
Front - Zone 3 Temperature 　 340-360 °C 　
Middle - Zone 2 Temperature 　 330-350 °C 　
Rear - Zone 1 Temperature 　 320-340 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 125-140 °C 　
　 　 　 　 　
ATX200R 　 　 　 　
High flow Polyetherimide blend with internal mold release. ECO Conforming, UL94 V0 Listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E45329-100397331 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.75 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 85 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 70 % ASTM D638
Tensile Modulus, 5 mm/min 　 3300 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 145 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3170 MPa ASTM D790
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 95 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 75 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6.5 % ISO 527
Tensile Strain, break, 50 mm/min 　 20 % ISO 527
Tensile Modulus, 1 mm/min 　 3000 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 125 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3100 MPa ISO 178
Ball Indentation Hardness, H358/30 　 125 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 2083 J/m ASTM D4812
Izod Impact, notched, 23°C 　 53 J/m ASTM D256
Izod Impact, notched, -30°C 　 55 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 2136 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 50 J ASTM D3763
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 209 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 187 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 190 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.00E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.00E-05 1/°C ASTM E831
Thermal Conductivity 　 0.23 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 195 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 180 °C ISO 75/Ae
Relative Temp Index, Elec 1) 115 °C UL 746B
Relative Temp Index, Mech w/impact 1) 115 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 115 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.26 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 26.5 g/10 min ASTM D1238
Density 　 1.26 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.5 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 16 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Relative Permittivity, 1 MHz 　 2.9 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.001 - IEC 60250
Dissipation Factor, 1 MHz 　 0.005 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Relative Permittivity, 50/60 Hz 　 2.9 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 130-140 °C 　
Drying Time 　 3月4日 Hrs 　
Melt Temperature 　 340-380 °C 　
Nozzle Temperature 　 340-360 °C 　
Front - Zone 3 Temperature 　 340-360 °C 　
Middle - Zone 2 Temperature 　 330-350 °C 　
Rear - Zone 1 Temperature 　 320-340 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 125-140 °C 　
　 　 　 　 　
ATX3562R 　 　 　 　
50% Glass fiber and mineral filled, high flow Polyetherimide blend with internal mold release and enhanced dimensional stability. ECO Conforming.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 125 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 125 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 2.5 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2.5 % ASTM D638
Tensile Modulus, 5 mm/min 　 14940 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 180 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 12900 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 121 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 121 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 1.4 % ISO 527
Tensile Strain, break, 5 mm/min 　 1.4 % ISO 527
Tensile Modulus, 1 mm/min 　 14690 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 172 MPa ISO 178
Flexural Modulus, 2 mm/min 　 13550 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 50 J/m ASTM D256
Izod Impact, notched, -30°C 　 49 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 111 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 12 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 184 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 183 °C ASTM D648
CTE, -40°C to 150°C, flow 　 1.60E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 3.80E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 1.60E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 3.80E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 187 °C ISO 306
Vicat Softening Temp, Rate B/120 　 195 °C ISO 306
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 195 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 182 °C ISO 75/Af
PHYSICAL 　 　 　 　
Specific Gravity 　 1.69 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.2-0.3 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.3-0.5 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 20 g/10 min ASTM D1238
Density 　 1.69 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.04 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 20 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 6.00E+15 Ω.cm ASTM D257
Surface Resistivity 　 2.10E+15 Ω ASTM D257
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 135 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 10 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-370 °C 　
Nozzle Temperature 　 350-370 °C 　
Front - Zone 3 Temperature 　 350-370 °C 　
Middle - Zone 2 Temperature 　 345-365 °C 　
Rear - Zone 1 Temperature 　 340-360 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
AUT195 　 　 　 　
High flow Polyetherimide blend for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 195C (SABIC test method).EuropeAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 70 % ASTM D638
Tensile Modulus, 1 mm/min 　 3000 MPa ISO 527
Flexural Modulus, 2 mm/min 　 3100 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Thermal Conductivity 　 0.23 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 6.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 6.00E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 195 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 180 °C ISO 75/Ae
Metallized Haze Onset 　 195 °C SABIC method
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, xflow 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 24 g/10 min ASTM D1238
Density 　 1.27 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.5 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 16 cm³/10 min ISO 1133
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 130-140 °C 　
Drying Time 　 3月4日 Hrs 　
Melt Temperature 　 340-380 °C 　
Nozzle Temperature 　 340-360 °C 　
Front - Zone 3 Temperature 　 340-360 °C 　
Middle - Zone 2 Temperature 　 330-350 °C 　
Rear - Zone 1 Temperature 　 320-340 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 125-140 °C 　
　 　 　 　 　
AUT200 　 　 　 　
Transparent high flow Polyetherimide (Tg 217C). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204C (SABIC IP method)EuropeAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yield, 5 mm/min 　 105 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 85 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 6 % ISO 527
Tensile Strain, break, 5 mm/min 　 60 % ISO 527
Tensile Modulus, 1 mm/min 　 3200 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 160 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
IMPACT 　 　 　 　
Instrumented Dart Impact Total Energy, 23°C 　 33 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 3 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate A/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 212 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 190 °C ISO 75/Ae
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 193 °C ISO 75/Af
Metallized Haze Onset 　 204 °C SABIC method
PHYSICAL 　 　 　 　
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Density 　 1.27 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.25 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.7 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 25 cm³/10 min ISO 1133
Melt Flow Rate, 337°C/6.7 kgf 　 17.8 g/10 min ASTM D1238
FLAME CHARACTERISTICS 　 　 　 　
FMVSS Burning Speed, thickness 2 mm 　 0-5 mm/min FMVSS 302
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
AUT200M 　 　 　 　
Transparent high flow Polyetherimide (Tg 217C) with internal mold release.. Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 204C (SABIC IP method).Europe
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy SABIC method
Tensile Stress, yield, 50 mm/min 　 105 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 85 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 6 % ISO 527
Tensile Strain, break, 50 mm/min 　 60 % ISO 527
Tensile Modulus, 1 mm/min 　 3300 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 160 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate A/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 212 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 195 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 190 °C ISO 75/Ae
Metallized Haze Onset 　 204 °C SABIC method
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Density 　 1.27 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.25 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.7 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 13 cm³/10 min ISO 1133
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
AUT210 　 　 　 　
Transparent, Thermoplastic Polyimide (TPI). Glass transition Temperature (Tg) of 227degC. Haze onset temperature of 212degC (SABIC IP method). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Resin is a Dual-use item and is subject to export control restrictions under both U.S. 15 CFR , 774 and Annex I of Reg. (EC) 428/2009 as ECN 1C008. Diversion contrary to law is prohibited.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 105 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 88 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 8 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 75 % ASTM D638
Tensile Modulus, 5 mm/min 　 3590 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 170 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3330 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 103 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 88 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 7 % ISO 527
Tensile Strain, break, 5 mm/min 　 54 % ISO 527
Tensile Modulus, 1 mm/min 　 3320 MPa ISO 527
Flexural Modulus, 2 mm/min 　 3140 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 2440 J/m ASTM D4812
Izod Impact, notched, 23°C 　 37 J/m ASTM D256
Izod Impact, notched, -30°C 　 38 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 33 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 16 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 222 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 215 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 201 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 211 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.00E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.00E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/50 　 221 °C ISO 306
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 196 °C ISO 75/Ae
Metallized Haze Onset 　 212 °C SABIC method
PHYSICAL 　 　 　 　
Specific Gravity 　 1.29 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 11 g/10 min ASTM D1238
Density 　 1.29 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.03 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.2 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 16 cm³/10 min ISO 1133
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 380-405 °C 　
Nozzle Temperature 　 375-400 °C 　
Front - Zone 3 Temperature 　 380-405 °C 　
Middle - Zone 2 Temperature 　 370-395 °C 　
Rear - Zone 1 Temperature 　 360-380 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
AUT230 　 　 　 　
Transparent polyetherimide (Tg 247 degC). Very low outgassing and plateout, for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 230 degC (SABIC Innovative Plastics method)EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 6 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 25 % ASTM D638
Tensile Modulus, 5 mm/min 　 3510 MPa ASTM D638
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3170 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 95 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 78 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 8.5 % ISO 527
Tensile Strain, break, 5 mm/min 　 16.8 % ISO 527
Tensile Modulus, 1 mm/min 　 3110 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 123 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3080 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 NB J/m ASTM D4812
Izod Impact, notched, 23°C 　 69 J/m ASTM D256
Izod Impact, notched, -30°C 　 74 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 33 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 242 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 217 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 237 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 230 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.00E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.00E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 242 °C ISO 306
Vicat Softening Temp, Rate B/120 　 238 °C ISO 306
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 228 °C ISO 75/Af
Metallized Haze Onset 　 230 °C SABIC method
PHYSICAL 　 　 　 　
Specific Gravity 　 1.3 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 367°C/6.6 kgf 　 15.5 g/10 min ASTM D1238
Density 　 1.3 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.75 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 8 cm³/10 min ISO 1133
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 380-405 °C 　
Nozzle Temperature 　 375-400 °C 　
Front - Zone 3 Temperature 　 380-405 °C 　
Middle - Zone 2 Temperature 　 370-395 °C 　
Rear - Zone 1 Temperature 　 360-380 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
CRS5001 　 　 　 　
Transparent, Standard flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221114 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Tensile Stress, yield, 50 mm/min 　 100 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 95 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 8 % ISO 527
Tensile Strain, break, 50 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 3200 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 110 MPa ISO 178
Flexural Stress, break, 2 mm/min 　 105 MPa ISO 178
Flexural Modulus, 2 mm/min 　 2500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 135 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 8 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 8 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
Thermal Conductivity 　 0.29 W/m-°C ISO 8302
CTE, -40°C to 150°C, flow 　 5.40E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 5.70E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 225 °C ISO 306
Vicat Softening Temp, Rate B/50 　 220 °C ISO 306
Vicat Softening Temp, Rate B/120 　 222 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Ae
Relative Temp Index, Elec 1) 160 °C UL 746B
Relative Temp Index, Mech w/impact 1) 160 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 160 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.6-0.8 % SABIC method
Density 　 1.28 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.06 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0043 - IEC 60250
Comparative Tracking Index 2) 175 V IEC 60112
Comparative Tracking Index, M 2) 125 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.2 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 0 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 3 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-410 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 350-390 °C 　
Rear - Zone 1 Temperature 　 325-365 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 120-170 °C 　
　 　 　 　 　
CRS5011 　 　 　 　
Transparent, Enhanced flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221115 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 49 % ISO 4589
MECHANICAL 　 　 　 　
Tensile Stress, yield, 50 mm/min 　 100 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 85 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 8 % ISO 527
Tensile Strain, break, 50 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 2900 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 110 MPa ISO 178
Flexural Modulus, 2 mm/min 　 2900 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
CTE, 23°C to 150°C, flow 　 5.50E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 220 °C ISO 306
Vicat Softening Temp, Rate B/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/120 　 215 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Ae
Relative Temp Index, Elec 1) 160 °C UL 746B
Relative Temp Index, Mech w/impact 1) 155 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 160 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Density 　 1.28 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.2 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 20 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 2.50E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 18.1 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0021 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.2 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 0 　 ≥1.5 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 3 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Nozzle Temperature 　 360-400 °C 　
Front - Zone 3 Temperature 　 370-410 °C 　
Middle - Zone 2 Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 340-380 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
CRS5011R 　 　 　 　
Enhanced flow Polyetherimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics and ketones. ECO Conforming.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 100 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 75 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 8 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 60 % ASTM D638
Tensile Modulus, 5 mm/min 　 2900 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 138 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3100 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 100 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 85 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 8 % ISO 527
Tensile Strain, break, 5 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 2900 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 110 MPa ISO 178
Flexural Modulus, 2 mm/min 　 2900 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 2100 J/m ASTM D4812
Izod Impact, notched, 23°C 　 59 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 2080 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 30 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 7 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 7 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 227 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 213 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 201 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 216 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 204 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.50E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.50E-05 1/°C ASTM E831
Thermal Conductivity 　 0.31 W/m-°C ASTM C177
CTE, 23°C to 150°C, flow 　 5.50E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 220 °C ISO 306
Vicat Softening Temp, Rate B/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/120 　 215 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Ae
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 208 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 198 °C ISO 75/Af
PHYSICAL 　 　 　 　
Specific Gravity 　 1.28 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.7 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.4-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.4-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 11 g/10 min ASTM D1238
Density 　 1.28 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.2 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 20 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Dielectric Strength, in oil, 3.2 mm 　 18 kV/mm ASTM D149
Relative Permittivity, 50/60 Hz 　 3.2 - ASTM D150
Dissipation Factor, 50/60 Hz 　 0.0021 - ASTM D150
Volume Resistivity 　 2.50E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 18.1 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0021 - IEC 60250
Comparative Tracking Index 　 150 V IEC 60112
Comparative Tracking Index, M 　 100 V IEC 60112
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 365-390 °C 　
Nozzle Temperature 　 360-380 °C 　
Front - Zone 3 Temperature 　 365-390 °C 　
Middle - Zone 2 Temperature 　 355-375 °C 　
Rear - Zone 1 Temperature 　 345-365 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
CRS5111 　 　 　 　
10% Glass fiber filled, enhanced flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 and 5 VA listing.AsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221117 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 117 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 112 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 4 % ASTM D638
Tensile Modulus, 5 mm/min 　 4750 MPa ASTM D638
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 193 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 4890 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 37 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 357 J/m ASTM D256
THERMAL 　 　 　 　
HDT, 1.82 MPa, 6.4 mm, unannealed 　 215 °C ASTM D648
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.36 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.7-0.9 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.6-0.8 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 6.9 g/10 min ASTM D1238
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 3 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 365-390 °C 　
Nozzle Temperature 　 360-380 °C 　
Front - Zone 3 Temperature 　 365-390 °C 　
Middle - Zone 2 Temperature 　 355-375 °C 　
Rear - Zone 1 Temperature 　 345-365 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
CRS5201 　 　 　 　
20% Glass fiber filled, standard flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221118 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Tensile Stress, break, 5 mm/min 　 135 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 3 % ISO 527
Tensile Modulus, 1 mm/min 　 7200 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 180 MPa ISO 178
Flexural Modulus, 2 mm/min 　 5800 MPa ISO 178
Ball Indentation Hardness, H358/30 　 145 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 40 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 40 kJ/m² ISO 180/1U
THERMAL 　 　 　 　
CTE, 23°C to 150°C, flow 　 2.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 225 °C ISO 306
Vicat Softening Temp, Rate B/50 　 220 °C ISO 306
Vicat Softening Temp, Rate B/120 　 222 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.43 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.2 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 5 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0043 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.2 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 370-410 °C 　
Front - Zone 3 Temperature 　 380-420 °C 　
Middle - Zone 2 Temperature 　 370-410 °C 　
Rear - Zone 1 Temperature 　 350-390 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
CRS5201R 　 　 　 　
20% Glass fiber filled, standard flow Polyetherimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO Conforming.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-103873032 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Tensile Stress, break, 5 mm/min 　 135 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 3 % ISO 527
Tensile Modulus, 1 mm/min 　 7200 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 180 MPa ISO 178
Flexural Modulus, 2 mm/min 　 5800 MPa ISO 178
Ball Indentation Hardness, H358/30 　 145 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 40 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 40 kJ/m² ISO 180/1U
THERMAL 　 　 　 　
CTE, -40°C to 150°C, flow 　 2.70E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 5.80E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 225 °C ISO 306
Vicat Softening Temp, Rate B/50 　 220 °C ISO 306
Vicat Softening Temp, Rate B/120 　 222 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.43 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.2 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 5 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 16 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0043 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.2 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 370-410 °C 　
Front - Zone 3 Temperature 　 380-420 °C 　
Middle - Zone 2 Temperature 　 370-410 °C 　
Rear - Zone 1 Temperature 　 350-390 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
CRS5211R 　 　 　 　
20% Glass fiber filled, enhanced flow Polyetherimide copolymer (Tg 225C) with internal mold release and enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming.AsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-101404949 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 137 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 144 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Modulus, 5 mm/min 　 6890 MPa ASTM D638
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 213 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 6890 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 74 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 459 J/m ASTM D256
THERMAL 　 　 　 　
HDT, 1.82 MPa, 6.4 mm, unannealed 　 218 °C ASTM D648
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.45 - ASTM D792
Melt Flow Rate, 337°C/6.6 kgf 　 5.5 g/10 min ASTM D1238
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 365-390 °C 　
Nozzle Temperature 　 360-380 °C 　
Front - Zone 3 Temperature 　 365-390 °C 　
Middle - Zone 2 Temperature 　 355-375 °C 　
Rear - Zone 1 Temperature 　 345-365 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
CRS5301 　 　 　 　
30% Glass fiber filled, standard flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 and 5VA listing.AsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221120 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, brk, Type I, 5 mm/min 　 165 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Modulus, 5 mm/min 　 8960 MPa ASTM D638
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 234 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 8960 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 112 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 555 J/m ASTM D256
THERMAL 　 　 　 　
HDT, 1.82 MPa, 6.4 mm, unannealed 　 221 °C ASTM D648
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.51 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.2-0.4 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 1.8 g/10 min ASTM D1238
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 4 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 365-390 °C 　
Nozzle Temperature 　 360-380 °C 　
Front - Zone 3 Temperature 　 365-390 °C 　
Middle - Zone 2 Temperature 　 355-375 °C 　
Rear - Zone 1 Temperature 　 345-365 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
CRS5311 　 　 　 　
30% Glass fiber filled, enhanced flow Polyetherimide copolymer (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics, and ketones. ECO conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221121 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥1.5 mm UL 94
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.5 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
MECHANICAL 　 　 　 　
Tensile Stress, break, 5 mm/min 　 160 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 10000 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 8200 MPa ISO 178
Ball Indentation Hardness, H358/30 　 165 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 35 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 35 kJ/m² ISO 180/1U
THERMAL 　 　 　 　
Thermal Conductivity 　 0.33 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 2.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 7.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 228 °C ISO 306
Vicat Softening Temp, Rate B/120 　 220 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 215 °C ISO 75/Ae
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.2-0.4 % SABIC method
Density 　 1.52 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.15 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 18 kV/mm IEC 60243-1
Relative Permittivity, 1 MHz 　 3.1 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.002 - IEC 60250
Dissipation Factor, 1 MHz 　 0.003 - IEC 60250
Comparative Tracking Index 2) 150 V IEC 60112
Comparative Tracking Index, M 2) 100 V IEC 60112
Relative Permittivity, 50/60 Hz 　 3.2 - IEC 60250
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 0 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 3 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 370-410 °C 　
Front - Zone 3 Temperature 　 380-420 °C 　
Middle - Zone 2 Temperature 　 370-410 °C 　
Rear - Zone 1 Temperature 　 350-390 °C 　
Hopper Temperature 　 80-100 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
D9065 　 　 　 　
Polyetherimide blend. Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.AsiaAmericas
DH1004 　 　 　 　
High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-100737020 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
Oxygen Index (LOI) 　 46 % ASTM D2863
NBS Smoke Density, Flaming, Ds 4 min 　 0.7 - ASTM E662
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 95 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 90 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 85 % ASTM D638
Tensile Modulus, 5 mm/min 　 2900 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 140 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3000 MPa ASTM D790
Tensile Stress, yield, 50 mm/min 　 97 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 80 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 7 % ISO 527
Tensile Strain, break, 50 mm/min 　 80 % ISO 527
Flexural Stress, yield, 2 mm/min 　 136 MPa ISO 178
Flexural Modulus, 2 mm/min 　 2800 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 70 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 3300 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 88 J ASTM D3763
Instrumented Impact Total Energy, 0°C 　 99 J ASTM D3763
Instrumented Impact Total Energy, -20°C 　 88 J ASTM D3763
Instrumented Dart Impact Ductility, 23°C 　 100 % ASTM D3763
Instrumented Dart Impact Ductility, 0°C 　 100 % ASTM D3763
Instrumented Dart Impact Ductility, -20°C 　 90 % ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 6 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 6 kJ/m² ISO 180/1A
Charpy Impact, notched, 23°C 　 11 kJ/m² ISO 179/2C
THERMAL 　 　 　 　
HDT, 0.45 MPa, 6.4 mm, unannealed 　 214 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 204 °C ASTM D648
CTE, -20°C to 150°C, flow 　 5.60E-05 1/°C ASTM E831
CTE, -20°C to 150°C, xflow 　 5.50E-05 1/°C ASTM E831
Thermal Conductivity 　 0.19 W/m-°C ASTM C177
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate A/50 　 219 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 212 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 190 °C ISO 75/Ae
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.28 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 10 g/10 min ASTM D1238
Density 　 1.28 g/cm³ ISO 1183
Melt Volume Rate, MVR at 360°C/5.0 kg 　 14 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 1 　 ≥0.75 mm UL 746A
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 6月8日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 355-390 °C 　
Nozzle Temperature 　 345-390 °C 　
Front - Zone 3 Temperature 　 345-390 °C 　
Middle - Zone 2 Temperature 　 335-390 °C 　
Rear - Zone 1 Temperature 　 330-390 °C 　
Mold Temperature 　 130-160 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
DT1810EV 　 　 　 　
Improved ductility, transparent, enhanced flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming, UL94 V0 listed.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-640471 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.75 mm UL 94
Glow Wire Ignitability Temperature, 3.0 mm 　 825 °C IEC 60695-2-13
Glow Wire Ignitability Temperature, 1.5 mm 　 825 °C IEC 60695-2-13
Glow Wire Ignitability Temperature, 0.75 mm 　 825 °C IEC 60695-2-13
Glow Wire Flammability Index, 3.0 mm 　 960 °C IEC 60695-2-12
Glow Wire Flammability Index, 1.5 mm 　 960 °C IEC 60695-2-12
Glow Wire Flammability Index, 0.75 mm 　 960 °C IEC 60695-2-12
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 103 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 85 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 80 % ASTM D638
Tensile Modulus, 5 mm/min 　 3210 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 145 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3320 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 98 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 80 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 7 % ISO 527
Tensile Strain, break, 5 mm/min 　 80 % ISO 527
Tensile Modulus, 1 mm/min 　 2500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 135 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3100 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 NB J/m ASTM D4812
Izod Impact, unnotched, -30°C 　 NB J/m ASTM D4812
Izod Impact, notched, 23°C 　 32 J/m ASTM D256
Izod Impact, notched, -30°C 　 35 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 48 J ASTM D3763
Izod Impact, notched 80*10*4 +23°C 　 2 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 2 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 2 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 192 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 173 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 178 °C ASTM D648
CTE, -40°C to 150°C, flow 　 6.00E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 6.00E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 5.50E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.50E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/50 　 192 °C ISO 306
Vicat Softening Temp, Rate B/120 　 195 °C ISO 306
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 168 °C ISO 75/Ae
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.28 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 43 g/10 min ASTM D1238
Density 　 1.28 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 0.36 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.08 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 56 cm³/10 min ISO 1133
OPTICAL 　 　 　 　
Light Transmission 　 　 　 　
at 1.0 mm and 850 nm 　 86 % ASTM D1003
at 1.0 mm and 1350 nm 　 88 % ASTM D1003
Refractive Index 　 　 　 　
at 850 nm 　 1.632 - ISO 489
at 1350 nm 　 1.619 - ISO 489
Abbe number 　 21 - ISO 489
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 1 　 ≥0.75 mm UL 746A
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 135 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 12 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 330-355 °C 　
Nozzle Temperature 　 325-350 °C 　
Front - Zone 3 Temperature 　 330-355 °C 　
Middle - Zone 2 Temperature 　 320-345 °C 　
Rear - Zone 1 Temperature 　 310-330 °C 　
Mold Temperature 　 95-135 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
DU242 　 　 　 　
Enhanced low temperature impact, high flow Polyetherimide blend. ECO Conforming.Americas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
INJECTION MOLDING 1) 　 　 　
Drying Temperature 　 135 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 12 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 330-355 °C 　
Nozzle Temperature 　 325-350 °C 　
Front - Zone 3 Temperature 　 330-355 °C 　
Middle - Zone 2 Temperature 　 320-345 °C 　
Rear - Zone 1 Temperature 　 310-330 °C 　
Mold Temperature 　 95-135 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
FLAME CHARACTERISTICS 2) 　 　 　
UL Yellow Card Link 　 E121562-647600 - -
UL Recognized, 94V-0 Flame Class Rating 　 1 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 74 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 67 % ASTM D638
Tensile Modulus, 5 mm/min 　 2580 MPa ASTM D638
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 112 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 2510 MPa ASTM D790
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 181 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 2045 J/m ASTM D256
THERMAL 　 　 　 　
Relative Temp Index, Elec 　 80 °C UL 746B
Relative Temp Index, Mech w/impact 　 80 °C UL 746B
Relative Temp Index, Mech w/o impact 　 80 °C UL 746B
HDT, 1.82 MPa, 6.4 mm, unannealed 　 160 °C ASTM D648
PHYSICAL 　 　 　 　
Mold Shrinkage, flow, 24 hrs 3) 0.5-0.7 % ASTM D955
Mold Shrinkage, xflow, 24 hrs 3) 0.5-0.7 % ASTM D955
Specific Gravity 　 1.24 - ASTM D792
Melt Flow Rate, 337°C/6.6 kgf 　 30 g/10 min ASTM D1238
　 　 　 　 　
EXUM0167 　 　 　 　
Improved ductility, transparent, standard flow Polyetherimide blend (Tg 200C) with internal mold release and enhanced ductility. ECO Conforming.Americas
HU1004 　 　 　 　
High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-100737020 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
Oxygen Index (LOI) 　 46 % ASTM D2863
NBS Smoke Density, Flaming, Ds 4 min 　 0.7 - ASTM E662
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 95 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 90 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 85 % ASTM D638
Tensile Modulus, 5 mm/min 　 2900 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 140 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3000 MPa ASTM D790
Tensile Stress, yield, 50 mm/min 　 97 MPa ISO 527
Tensile Stress, break, 50 mm/min 　 80 MPa ISO 527
Tensile Strain, yield, 50 mm/min 　 7 % ISO 527
Tensile Strain, break, 50 mm/min 　 80 % ISO 527
Flexural Stress, yield, 2 mm/min 　 136 MPa ISO 178
Flexural Modulus, 2 mm/min 　 2800 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 70 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 3300 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 93 J ASTM D3763
Instrumented Impact Total Energy, 0°C 　 99 J ASTM D3763
Instrumented Impact Total Energy, -20°C 　 93 J ASTM D3763
Instrumented Dart Impact Ductility, 23°C 　 100 % ASTM D3763
Instrumented Dart Impact Ductility, 0°C 　 100 % ASTM D3763
Instrumented Dart Impact Ductility, -20°C 　 90 % ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 6 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 6 kJ/m² ISO 180/1A
Charpy Impact, notched, 23°C 　 11 kJ/m² ISO 179/2C
THERMAL 　 　 　 　
HDT, 0.45 MPa, 6.4 mm, unannealed 　 214 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 204 °C ASTM D648
CTE, -20°C to 150°C, flow 　 5.60E-05 1/°C ASTM E831
CTE, -20°C to 150°C, xflow 　 5.50E-05 1/°C ASTM E831
Thermal Conductivity 　 0.19 W/m-°C ASTM C177
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate A/50 　 219 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 212 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 190 °C ISO 75/Ae
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.28 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 10 g/10 min ASTM D1238
Density 　 1.28 g/cm³ ISO 1183
Melt Volume Rate, MVR at 360°C/5.0 kg 　 14 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥1.5 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 1 　 ≥0.75 mm UL 746A
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 6月8日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 355-390 °C 　
Nozzle Temperature 　 345-390 °C 　
Front - Zone 3 Temperature 　 345-390 °C 　
Middle - Zone 2 Temperature 　 335-390 °C 　
Rear - Zone 1 Temperature 　 330-390 °C 　
Mold Temperature 　 130-160 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
HU1100 　 　 　 　
Standard flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change; biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-100044765 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.4 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 110 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 85 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 70 % ASTM D638
Tensile Modulus, 5 mm/min 　 3720 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 173 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3430 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 105 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 85 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 6 % ISO 527
Tensile Strain, break, 5 mm/min 　 60 % ISO 527
Tensile Modulus, 1 mm/min 　 3200 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 160 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 37 J/m ASTM D256
Izod Impact, notched, -30°C 　 - J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 38 J ASTM D3763
Izod Impact, notched 80*10*4 +23°C 　 6 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 6 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 4 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 211 °C ASTM D1525
HDT, 1.82 MPa, 6.4 mm, unannealed 　 198 °C ASTM D648
CTE, -40°C to 40°C, flow 　 5.50E-05 1/°C ASTM E831
CTE, -40°C to 40°C, xflow 　 5.50E-05 1/°C ASTM E831
CTE, -40°C to 40°C, flow 　 5.50E-05 1/°C ISO 11359-2
CTE, -40°C to 40°C, xflow 　 5.50E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/50 　 211 °C ISO 306
Vicat Softening Temp, Rate B/120 　 212 °C ISO 306
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 188 °C ISO 75/Af
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.36 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 8.8 g/10 min ASTM D1238
Density 　 1.27 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.25 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.7 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 12 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
HU1110 　 　 　 　
Enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change; biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-100044748 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥3 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
UL Recognized, 94V-2 Flame Class Rating 　 ≥0.4 mm UL 94
Glow Wire Flammability Index 960°C, passes at 2) 3.2 mm IEC 60695-2-12
Oxygen Index (LOI) 　 47 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 10 mg/1000cy SABIC method
Tensile Stress, yield, 5 mm/min 　 110 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 6 % ISO 527
Tensile Strain, break, 5 mm/min 　 60 % ISO 527
Tensile Modulus, 1 mm/min 　 3500 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 140 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3300 MPa ISO 178
Ball Indentation Hardness, H358/30 　 145 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 5 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
CTE, -40°C to 40°C, flow 　 5.50E-05 1/°C ASTM E831
CTE, -40°C to 40°C, xflow 　 5.50E-05 1/°C ASTM E831
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, -40°C to 40°C, flow 　 5.50E-05 1/°C ISO 11359-2
CTE, -40°C to 40°C, xflow 　 5.50E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 205 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 210 °C ISO 75/Af
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Density 　 1.36 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.65 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 12 cm³/10 min ISO 1133
Melt Volume Rate, MVR at 360°C/5.0 kg 　 21 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥3 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 5 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
HU2100 　 　 　 　
10% Glass fiber filled, standard flow Polyetherimide (Tg 217C). US FDA and European Food Contact approved. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-502535 - -
UL Yellow Card Link 2 　 E121562-102518191 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
ELECTRICAL 3) 　 　 　
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Comparative Tracking Index 　 150 V IEC 60112
Comparative Tracking Index (UL) {PLC} 1) 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 1) ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 1) ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 1) ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 1) ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 1) 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 1) 6 PLC Code ASTM D495
PHYSICAL 3) 　 　 　
Specific Gravity 　 1.34 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 4) 0.5-0.6 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 7 g/10 min ASTM D1238
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 9 cm³/10 min ISO 1133
THERMAL 3) 　 　 　
Vicat Softening Temp, Rate B/50 　 223 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 205 °C ASTM D648
CTE, -40°C to 40°C, flow 　 3.00E-05 1/°C ASTM E831
CTE, -40°C to 40°C, xflow 　 5.10E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
IMPACT 3) 　 　 　
Izod Impact, notched, 23°C 　 53 J/m ASTM D256
Izod Impact, notched, -30°C 　 53 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 10 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 7 kJ/m² ISO 179/1eA
MECHANICAL 3) 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 114 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 115 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 6 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 6 % ASTM D638
Tensile Modulus, 5 mm/min 　 4680 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 160 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 5500 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 115 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 4 % ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
　 　 　 　 　
HU2110 　 　 　 　
10% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). UL94 V0 and 5VA listing. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.EuropeAsiaAmericas
HU2200 　 　 　 　
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.Americas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 131 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 131 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 4 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 4 % ASTM D638
Tensile Modulus, 5 mm/min 　 6890 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 225 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 6850 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 131 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 131 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 4 % ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 6890 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 228 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6890 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 480 J/m ASTM D4812
Izod Impact, notched, 23°C 　 64 J/m ASTM D256
Izod Impact, notched, -30°C 　 70 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 8 J ASTM D3763
Izod Impact, notched 80*10*4 +23°C 　 64 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 70 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 65 kJ/m² ISO 179/1eA
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 220 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 208 °C ASTM D648
CTE, -40°C to 150°C, xflow 　 4.90E-05 1/°C ASTM E831
CTE, -20°C to 150°C, flow 　 2.10E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.42 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 　 0.3-0.5 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 6 g/10 min ASTM D1238
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
HU2210 　 　 　 　
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.EuropeAsiaAmericas
HU2300 (OLD to be deleted) 　 　 　 　
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.Americas
HU2310 (OLD to be deleted) 　 　 　 　
30% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.EuropeAsiaAmericas
JD7201 　 　 　 　
LNP™ STAT-KON™ JD7201 CompoundEuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E45587-236989 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
MECHANICAL 2) 　 　 　
Tensile Stress, yield 　 204 MPa SABIC - Japan Method
Tensile Strain, break 　 6 % SABIC - Japan Method
Flexural Stress 　 255 MPa ASTM D790
Flexural Modulus 　 13430 MPa ASTM D790
IMPACT 2) 　 　 　
Izod Impact, notched, 23°C 　 69 J/m ASTM D256
THERMAL 2) 　 　 　
HDT, 0.45 MPa, 3.2 mm, unannealed 　 211 °C ASTM D648
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 2) 　 　 　
Specific Gravity 　 1.34 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.26 % ASTM D570
Mold Shrinkage, flow, 3.2 mm 4) 0.2-0.3 % SABIC method
ELECTRICAL 2) 　 　 　
Surface Resistivity 　 1.E+02-1.E+04 Ω ASTM D257
INJECTION MOLDING 3) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 360-400 °C 　
Rear - Zone 1 Temperature 　 360-380 °C 　
Middle - Zone 2 Temperature 　 370-390 °C 　
Front - Zone 3 Temperature 　 380-400 °C 　
Nozzle Temperature 　 390-400 °C 　
Mold Temperature 　 140-180 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw speed (Circumferential speed) 　 0.2-0.3 m/s 　
　 　 　 　 　
JD7903 　 　 　 　
LNP™ STAT-KON™ Compound JD7903EuropeAsiaAmericas
JD7904 　 　 　 　
LNP™ STAT-KON™ Compound JD7904EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 1) 　 　 　
Tensile Stress, yield 　 84 MPa SABIC - Japan Method
Tensile Strain, break 　 4 % SABIC - Japan Method
Flexural Stress 　 127 MPa ASTM D790
Flexural Modulus 　 3720 MPa ASTM D790
IMPACT 1) 　 　 　
Izod Impact, notched, 23°C 　 29 J/m ASTM D256
THERMAL 1) 　 　 　
HDT, 0.45 MPa, 3.2 mm, unannealed 　 200 °C ASTM D648
PHYSICAL 1) 　 　 　
Specific Gravity 　 1.31 - ASTM D792
Mold Shrinkage, flow, 3.2 mm 3) 0.5-0.7 % SABIC method
ELECTRICAL 1) 　 　 　
Surface Resistivity 4) 1.00E+10 Ω ASTM D257
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 380-410 °C 　
Nozzle Temperature 　 380-405 °C 　
Front - Zone 3 Temperature 　 380-410 °C 　
Middle - Zone 2 Temperature 　 370-400 °C 　
Rear - Zone 1 Temperature 　 360-390 °C 　
Mold Temperature 　 140-170 °C 　
Back pressure (Plastic Pressure) 　 5月10日 MPa 　
Screw speed (Circumferential speed) 　 0.1-0.2 m/s 　
Shot to Cylinder Size 　 40-70 % 　
　 　 　 　 　
LTX300A 　 　 　 　
High flow Polyetherimide blend with low toxicity, smoke and flame evolution. ECO Compliant, UL94 V0 listing in recognized colors.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221074 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.3 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 97 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 85 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 7 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 85 % ASTM D638
Tensile Modulus, 5 mm/min 　 3310 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 145 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3240 MPa ASTM D790
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, yield, 5 mm/min 　 90 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 75 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 6 % ISO 527
Tensile Strain, break, 5 mm/min 　 25 % ISO 527
Tensile Modulus, 1 mm/min 　 3200 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 130 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3200 MPa ISO 178
Ball Indentation Hardness, H358/30 　 127 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 2100 J/m ASTM D4812
Izod Impact, notched, 23°C 　 69 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 2080 J/m ASTM D256
Gardner, 23°C 　 35 J ASTM D3029
Instrumented Dart Impact Total Energy, 23°C 　 40 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 7 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 7 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 6 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 210 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 201 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 187 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 204 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 189 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.00E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.00E-05 1/°C ASTM E831
Thermal Conductivity 　 0.26 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 210 °C ISO 306
Vicat Softening Temp, Rate B/50 　 200 °C ISO 306
Vicat Softening Temp, Rate B/120 　 200 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 185 °C ISO 75/Ae
Relative Temp Index, Elec 1) 150 °C UL 746B
Relative Temp Index, Mech w/impact 1) 120 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 150 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.3 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.6-0.8 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 295°C/6.6 kgf 　 2.4 g/10 min ASTM D1238
Density 　 1.3 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.25 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.7 % ISO 62
Melt Volume Rate, MVR at 340°C/5.0 kg 　 15 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 0 　 ≥0.75 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 135 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 10 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-370 °C 　
Nozzle Temperature 　 350-370 °C 　
Front - Zone 3 Temperature 　 350-370 °C 　
Middle - Zone 2 Temperature 　 345-365 °C 　
Rear - Zone 1 Temperature 　 340-360 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
LTX300B 　 　 　 　
Standard flow Polyetherimide blend with low toxicity, smoke, and flame evolution. ECO Compliant, UL94 V0 listing.AmericasAsiaEuropeGreater ChinaMEA
NP2300 　 　 　 　
ULTEM NP2300 resin is a standard flow 30% glass fiber reinforced polyetherimide resin. The material is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers and offers UL94 V0 and 5VA ratings and FAR25.853 performance. This non-chlorinated, non-brominated flame-retardant grade has a UL-94 V0 rating at 1.5 mm (all colors) and certified per UL746G - an outline of investigation for non-Fluorine and non-PFAS containing materials. The material may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material is opaque and can be custom colored. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221099 - -
UL 746G certificate 　 UL 746G certificate - 　
UL Yellow Card Link 2 　 E121562-470961 - -
UL Recognized, 94-5VA Flame Class Rating 　 1.2 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 0.25 mm UL 94
Glow Wire Ignitability Temperature, 2.0 mm 　 900 °C IEC 60695-2-13
Glow Wire Flammability Index, 2.0 mm 　 960 °C IEC 60695-2-12
UV-light, water exposure/immersion 　 F1 - UL 746C
Oxygen Index (LOI) 　 48 % ISO 4589
Oxygen Index (LOI) 　 50 % ASTM D2863
NBS Smoke Density, Flaming, Ds 4 min 　 1.6 - ASTM E662
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-410 °C 　
Nozzle Temperature 　 345-410 °C 　
Front - Zone 3 Temperature 　 345-420 °C 　
Middle - Zone 2 Temperature 　 340-410 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 135-180 °C 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
Screw Speed 　 40-70 rpm 　
Screw speed (Circumferential speed) 　 0.15-0.25 m/s 　
Back Pressure 　 0.3-1.5 MPa 　
ELECTRICAL 3) 　 　 　
Volume Resistivity 　 1.00E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 1.00E+15 Ω IEC 60093
Dielectric Strength, in oil, 0.8 mm 　 35 kV/mm IEC 60243-1
Dielectric Strength, in oil, 1.6 mm 　 26 kV/mm IEC 60243-1
Dielectric Strength, in oil, 3.2 mm 　 15 kV/mm IEC 60243-1
Relative Permittivity, 50/60 Hz 　 3.3 - IEC 60250
Relative Permittivity, 1 MHz 　 3.4 - IEC 60250
Dissipation Factor, 50/60 Hz 　 0.0016 - IEC 60250
Dissipation Factor, 1 MHz 　 0.0023 - IEC 60250
Dielectric Constant 4) 　 　 　
at 1.1 GHz 　 3.51 - -
at 5 GHz 　 3.59 - -
at 10 GHz 　 3.6 - -
Dissipation Factor 4) 　 　 　
at 1.1 GHz 　 0.0029 - -
at 5 GHz 　 0.0036 - -
at 10 GHz 　 0.0046 - -
Comparative Tracking Index 5) 150 V IEC 60112
Comparative Tracking Index, M 5) 100 V IEC 60112
Volume Resistivity 　 3.00E+16 Ω.cm ASTM D257
Dielectric Strength, in air, 1.6 mm 　 24.8 kV/mm ASTM D149
Dielectric Strength, in oil, 1.6 mm 　 30.3 kV/mm ASTM D149
Relative Permittivity, 1 kHz 　 3.7 - ASTM D150
Dissipation Factor, 1 kHz 　 0.0015 - ASTM D150
Comparative Tracking Index (UL) {PLC} 1) 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 1) 3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 3 1) 1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 1) 1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 1) 3 mm UL 746A
High Voltage Arc Track Rate {PLC} 1) 3 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 1) 6 PLC Code ASTM D495
PHYSICAL 3) 　 　 　
Density 　 1.51 g/cm³ ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs) 　 0.1 % ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium) 　 0.6 % ISO 62-4
Water Absorption, (23°C/24hrs) 　 0.16 % ISO 62-1
Water Absorption, (23°C/saturated) 　 0.9 % ISO 62-1
Melt Volume Rate, MVR at 360°C/5.0 kg 　 6 cm³/10 min ISO 1133
Specific Gravity 　 1.51 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.16 % ASTM D570
Water Absorption, (23°C/Saturated) 　 0.09 % ASTM D570
Melt Flow Rate, 337°C/6.6 kgf 　 5 g/10 min ASTM D1238
Mold Shrinkage, flow, 3.2 mm 　 0.2-0.4 % SABIC method
THERMAL 3) 　 　 　
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 215 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 210 °C ISO 75/Af
Vicat Softening Temp, Rate A/50 　 225 °C ISO 306
Vicat Softening Temp, Rate B/120 　 220 °C ISO 306
Vicat Softening Temp, Rate B/50 　 213 °C ISO 306
CTE, -40°C to 150°C, flow 　 1.80E-05 1/°C ISO 11359-2
CTE, -40°C to 150°C, xflow 　 4.80E-05 1/°C ISO 11359-2
Thermal Conductivity 　 0.31 W/m-°C ISO 8302
Ball Pressure Test, 125°C +/- 2°C 　 PASS - IEC 60695-10-2
HDT, 0.45 MPa, 3.2 mm, unannealed 　 215 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 212 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 211 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 210 °C ASTM D648
CTE, -20°C to 150°C, flow 　 1.80E-05 1/°C ASTM E831
CTE, -20°C to 150°C, xflow 　 4.80E-05 1/°C ASTM E831
Relative Temp Index, Elec 1) 180 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 180 °C UL 746B
IMPACT 3) 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 10 kJ/m² ISO 180/1A
Izod Impact, unnotched 80*10*4 +23°C 　 40 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 40 kJ/m² ISO 180/1U
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 10 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 40 kJ/m² ISO 179/1eU
Izod Impact, notched, 23°C 　 90 J/m ASTM D256
Izod Impact, notched, -30°C 　 80 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 470 J/m ASTM D256
Izod Impact, unnotched, 23°C 　 600 J/m ASTM D4812
Izod Impact, unnotched, -30°C 　 600 J/m ASTM D4812
MECHANICAL 3) 　 　 　
Tensile Stress, break, 5 mm/min 　 175 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2.4 % ISO 527
Tensile Modulus, 1 mm/min 　 10500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 240 MPa ISO 178
Flexural Modulus, 2 mm/min 　 9600 MPa ISO 178
Ball Indentation Hardness, H358/30 　 165 MPa ISO 2039-1
Hardness, Rockwell M 　 110 - ISO 2039-2
Taber Abrasion, CS-17, 1 kg 　 20 mg/1000cy SABIC method
Tensile Stress, brk, Type I, 5 mm/min 　 175 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2.5 % ASTM D638
Tensile Modulus, 5 mm/min 　 10400 MPa ASTM D638
Flexural Stress, brk, 2.6 mm/min, 100 mm span 　 230 MPa ASTM D790
Flexural Modulus, 2.6 mm/min, 100 mm span 　 9400 MPa ASTM D790
Flexural Stress, brk, 1.3 mm/min, 50 mm span 　 250 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 9700 MPa ASTM D790
Hardness, Rockwell M 　 114 - ASTM D785
　 　 　 　 　
OLD 1000E (TO BE DELETED) 　 　 　 　
Transparent, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming. US FDA and EU Food Contact compliant, NSF 51 Listing. Effective June, 2007 this grade will no longer be supported with biocompatibility information and should not be used for medical applications which require biocompatibility. Alternative grade HU1000E.EuropeAsiaAmericas
OLD 1000F (TO BE DELETED) 　 　 　 　
ULTEMTM 1000F resin is an amorphous, transparent polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217?C. This inherently flame retardant resin has UL94 V0, V2 and 5VA ratings and is RoHS, US FDA and EU Food Contact compliant, with NSF 51 listing. ULTEMTM 1000F resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures.EuropeAsiaAmericas
OLD 1000P (TO BE DELETED) 　 　 　 　
Standard flow Polyetherimide (Tg 217C) in 350 micron powder. ECO Conforming.AsiaAmericas
OLD 1000R (TO BE DELETED) 　 　 　 　
ULTEM 1000R resin is an amorphous, opaque polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217?C. This inherently flame retardant resin has UL94 V0, V2 and 5VA ratings and is RoHS compliant. ULTEM 1000R resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures with standard flow and standard mold release.EuropeAsiaAmericas
OLD 1010F (TO BE DELETED) 　 　 　 　
ULTEM 1010F resin is an amorphous, transparent polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217 °C. This inherently flame retardant resin has UL94 V0, V2 and 5VA ratings and is RoHS compliant. ULTEM 1010F resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures with easy flow. This grade is US FDA and EU Food Contact compliant. ULTEM 1010F resin is not supported with biocompatibility information. For medical applications which require biocompatibility we offer ULTEM HU1010 resin.EuropeAsiaAmericas
OLD 1010M (TO BE DELETED) 　 　 　 　
ULTEM 1010M resin is an amorphous, transparent polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217?C. This inherently flame retardant resin is RoHS compliant. ULTEM 1010M resin is an unreinforced general purpose grade offering high heat resistance, high strength and modulus and broad chemical resistance up to high temperatures with enhanced flow and optimized mold release for metallized reflectors.EuropeAsiaAmericas
OLD 1010P (TO BE DELETED) 　 　 　 　
Enhanced flow Polyetherimide (Tg 217C) in 350 micron powder. ECO Conforming.Americas
OLD 1010R (TO BE DELETED) 　 　 　 　
Enhanced flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming, UL94 V0 and 5VA listing.EuropeAsiaAmericas
OLD 1010TC (TO BE DELETED) 　 　 　 　
ULTEMTM 1010TC resin is an amorphous, transparent polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217?C, with UL94 V0 and 5VA ratings offering high heat resistance and infrared transmission.Asia
OLD HU1000 (TO BE DELETED) 　 　 　 　
Transparent, standard flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.EuropeAsiaAmericas
OLD HU1000E (TO BE DELETED) 　 　 　 　
Transparent, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO, and E-beam sterilizable.EuropeAsiaAmericas
OLD HU1010 (TO BE DELETED) 　 　 　 　
Transparent, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI); food contact compliant; Steam, Gamma, EtO; and E-beam sterilizable.EuropeAsiaAmericas
OLD PW1000 (TO BE DELETED) 　 　 　 　
Unfilled Standard flow Polyetherimide (Tg 217?C). Specific grade-colors aredesigned and certified for use in Potable Water applications. KTW, WRAS, ACS, NSF-61 and W270 certified. US FDA and European Food Contact approved.Europe
PW2100 　 　 　 　
ULTEM PW2100 resin is an amorphous, opaque, 10% glass fiber reinforced polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217?C. This inherently flame retardant resin is KTW, WRAS, ACS, NSF-61 and W270 certified and is US FDA and European Food Contact approved. ULTEM PW2100 resin offers specific colors designed and certified for use in potable water applications.Europe
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-102518191 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 15 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 115 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 4 % ISO 527
Tensile Modulus, 1 mm/min 　 4500 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 185 MPa ISO 178
Flexural Modulus, 2 mm/min 　 4500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 7 kJ/m² ISO 179/2C
THERMAL 　 　 　 　
Thermal Conductivity 　 0.24 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 3.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.10E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 217 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.6 % SABIC method
Density 　 1.34 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 9 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 350-405 °C 　
Front - Zone 3 Temperature 　 360-415 °C 　
Middle - Zone 2 Temperature 　 350-405 °C 　
Rear - Zone 1 Temperature 　 340-395 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
PW2200 　 　 　 　
20% Glass fiber filled, standard flow Polyetherimide (Tg 217?C). Specific grade-colors are designed and certified for use in Potable Water applications. KTW, WRAS, ACS, NSF-61 and W270 certified. US FDA and European Food Contact approved.Europe
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-221093 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1.9 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.41 mm UL 94
Oxygen Index (LOI) 　 46 % ISO 4589
MECHANICAL 　 　 　 　
Taber Abrasion, CS-17, 1 kg 　 17 mg/1000cy SABIC method
Tensile Stress, break, 5 mm/min 　 140 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 6800 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 210 MPa ISO 178
Flexural Modulus, 2 mm/min 　 6500 MPa ISO 178
Ball Indentation Hardness, H358/30 　 150 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched 80*10*4 +23°C 　 30 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 30 kJ/m² ISO 180/1U
Charpy Impact, notched, 23°C 　 9 kJ/m² ISO 179/2C
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 35 kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Thermal Conductivity 　 0.28 W/m-°C ISO 8302
CTE, 23°C to 150°C, flow 　 2.10E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 4.90E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 PASSES - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 223 °C ISO 306
Vicat Softening Temp, Rate B/50 　 212 °C ISO 306
Vicat Softening Temp, Rate B/120 　 218 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 205 °C ISO 75/Ae
Relative Temp Index, Elec 1) 170 °C UL 746B
Relative Temp Index, Mech w/impact 1) 170 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 170 °C UL 746B
PHYSICAL 　 　 　 　
Mold Shrinkage on Tensile Bar, flow 　 0.3-0.5 % SABIC method
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.55 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 7 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Comparative Tracking Index (UL) {PLC} 　 4 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 3 　 ≥1.5 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥3 mm UL 746A
High Voltage Arc Track Rate {PLC} 　 2 PLC Code UL 746A
Arc Resistance, Tungsten {PLC} 　 6 PLC Code ASTM D495
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 370-410 °C 　
Nozzle Temperature 　 360-410 °C 　
Front - Zone 3 Temperature 　 370-420 °C 　
Middle - Zone 2 Temperature 　 360-410 °C 　
Rear - Zone 1 Temperature 　 350-400 °C 　
Hopper Temperature 　 80-120 °C 　
Mold Temperature 　 140-180 °C 　
　 　 　 　 　
PW2300 (OLD to be deleted) 　 　 　 　
ULTEM PW2300 resin is an amorphous, opaque, 30% glass fiber reinforced polyetherimide (PEI) plastic offering a glass transition temperature (Tg) of 217?C. This inherently flame retardant resin is KTW, WRAS, ACS, NSF-61 and W270 certified and is US FDA and European Food Contact approved. ULTEM PW2300 resin offers specific colors designed and certified for use in potable water applications.Europe
PW2400 　 　 　 　
40% Glass fiber filled, standard flow Polyetherimide (Tg 217?C). Specific grade-colors are designed and certified for use in Potable Water applications. KTW, WRAS, ACS, NSF-61 and W270 certified. US FDA and European Food Contact approved.Europe
SF2250 　 　 　 　
High flow ULTEM for thin wall applicationEuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E207780-100116343 - -
MECHANICAL 　 　 　 　
Tensile Stress, brk, Type I, 5 mm/min 　 162 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Modulus, 5 mm/min 　 8900 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 197 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 7260 MPa ASTM D790
Tensile Stress, break, 5 mm/min 　 157 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 3 % ISO 527
Flexural Modulus, 2 mm/min 　 7150 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 89 J/m ASTM D256
Izod Impact, notched 80*10*4 +23°C 　 9 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
HDT, 1.82 MPa, 3.2mm, unannealed 　 203 °C ASTM D648
CTE, -40°C to 150°C, flow 　 1.40E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.40E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 1.80E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.90E-05 1/°C ISO 11359-2
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 208 °C ISO 75/Ae
PHYSICAL 　 　 　 　
Specific Gravity 　 1.44 - ASTM D792
Moisture absorption (23°C/50% RH) 　 0.07 % -
Mold Shrinkage, flow 　 0.46 % SABIC method
Mold Shrinkage, xflow 　 0.54 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 19.7 g/10 min ASTM D1238
Density 　 1.44 g/cm³ ISO 1183
Water Absorption, (23°C/24hrs) 　 0.2 % ISO 62-1
Melt Volume Rate, MVR at 345°C/10.0 kg 　 40 cm³/10 min ISO 1133
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
SF2255 　 　 　 　
High flow Ultem for thin wall applicationAsia
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E207780-102158299 - -
UL Recognized, 94V-0 Flame Class Rating 　 1.5 mm UL 94
MECHANICAL 2) 　 　 　
Tensile Stress, brk, Type I, 5 mm/min 　 148 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 1.8 % ASTM D638
Tensile Modulus, 5 mm/min 　 10140 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 169 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 8090 MPa ASTM D790
IMPACT 2) 　 　 　
Izod Impact, notched, 23°C 　 76 J/m ASTM D256
THERMAL 2) 　 　 　
HDT, 1.82 MPa, 3.2mm, unannealed 　 203 °C ASTM D648
CTE, -40°C to 150°C, flow 　 1.43E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.50E-05 1/°C ASTM E831
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 2) 　 　 　
Specific Gravity 　 1.44 - ASTM D792
Mold Shrinkage, flow 4) 0.3 % SABIC method
Mold Shrinkage, xflow 4) 0.53 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 15.4 g/10 min ASTM D1238
Water Absorption, (23°C/24hrs) 　 0.06 % ISO 62-1
Melt Volume Rate, MVR at 345°C/10.0 kg 　 34 cm³/10 min ISO 1133
ELECTRICAL 2) 　 　 　
Dielectric Constant 　 　 　 　
1.1 GHz 　 3.448 - SABIC method
5 GHz 　 3.43 - SABIC method
10 GHz 　 3.398 - SABIC method
15 GHz 　 3.456 - SABIC method
Dissipation Factor 　 　 　 　
1.1 GHz 　 0.0028 - SABIC method
5 GHz 　 0.0033 - SABIC method
10 GHz 　 0.0036 - SABIC method
15 GHz 　 0.0039 - SABIC method
INJECTION MOLDING 3) 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
SF2260 　 　 　 　
High flow ULTEM for thin wall applicationAsia
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E45587-101275405 - -
UL Recognized, 94V-0 Flame Class Rating 　 1.5 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, brk, Type I, 5 mm/min 　 148 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2.4 % ASTM D638
Tensile Modulus, 5 mm/min 　 9400 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 191 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 7360 MPa ASTM D790
Tensile Stress, break, 5 mm/min 　 142 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2.4 % ISO 527
Flexural Modulus, 2 mm/min 　 7170 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 80 J/m ASTM D256
Izod Impact, notched 80*10*4 +23°C 　 8 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
HDT, 1.82 MPa, 3.2mm, unannealed 　 201 °C ASTM D648
CTE, -40°C to 150°C, flow 　 1.40E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.40E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 1.80E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 6.70E-05 1/°C ISO 11359-2
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.42 - ASTM D792
Moisture absorption (23°C/50% RH) 　 0.05 % -
Mold Shrinkage, flow 　 0.46 % SABIC method
Mold Shrinkage, xflow 　 0.54 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 30 g/10 min ASTM D1238
Density 　 1.42 g/cm³ ISO 1183
Water Absorption, (23°C/24hrs) 　 0.14 % ISO 62-1
Melt Volume Rate, MVR at 345°C/10.0 kg 　 70 cm³/10 min ISO 1133
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
SF2350 　 　 　 　
High flow ULTEM blends for thin wall applicationEuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E207780-100116344 - -
MECHANICAL 　 　 　 　
Tensile Stress, brk, Type I, 5 mm/min 　 172 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2.6 % ASTM D638
Tensile Modulus, 5 mm/min 　 11600 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 222 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 9320 MPa ASTM D790
Tensile Stress, break, 5 mm/min 　 171 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2.5 % ISO 527
Flexural Modulus, 2 mm/min 　 9400 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 95 J/m ASTM D256
Izod Impact, notched 80*10*4 +23°C 　 10 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
HDT, 1.82 MPa, 3.2mm, unannealed 　 204 °C ASTM D648
CTE, -40°C to 150°C, flow 　 1.50E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.50E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 1.40E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.60E-05 1/°C ISO 11359-2
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 209 °C ISO 75/Ae
PHYSICAL 　 　 　 　
Specific Gravity 　 1.52 - ASTM D792
Melt Flow Rate, 337°C/6.6 kgf 　 14.7 g/10 min ASTM D1238
Density 　 1.52 g/cm³ ISO 1183
Melt Volume Rate, MVR at 345°C/10.0 kg 　 30 cm³/10 min ISO 1133
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
SF2360 　 　 　 　
High flow ULTEM for thin wall applicationAsia
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E207780-100116345 - -
UL Recognized, 94V-0 Flame Class Rating 　 1.5 mm UL 94
MECHANICAL 　 　 　 　
Tensile Stress, brk, Type I, 5 mm/min 　 148 MPa ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 2 % ASTM D638
Tensile Modulus, 5 mm/min 　 11950 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 212 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 9940 MPa ASTM D790
Tensile Stress, break, 5 mm/min 　 152 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Flexural Modulus, 2 mm/min 　 9940 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, notched, 23°C 　 89 J/m ASTM D256
Izod Impact, notched 80*10*4 +23°C 　 9 kJ/m² ISO 180/1A
THERMAL 　 　 　 　
HDT, 1.82 MPa, 3.2mm, unannealed 　 203 °C ASTM D648
CTE, -40°C to 150°C, flow 　 1.50E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.40E-05 1/°C ASTM E831
CTE, 23°C to 150°C, flow 　 1.30E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 6.20E-05 1/°C ISO 11359-2
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 208 °C ISO 75/Ae
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.53 - ASTM D792
Moisture absorption (23°C/50% RH) 　 0.04 % -
Mold Shrinkage, flow 　 0.39 % SABIC method
Mold Shrinkage, xflow 　 0.47 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 18 g/10 min ASTM D1238
Density 　 1.53 g/cm³ ISO 1183
Water Absorption, (23°C/24hrs) 　 0.1 % ISO 62-1
Melt Volume Rate, MVR at 345°C/10.0 kg 　 40 cm³/10 min ISO 1133
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 350-400 °C 　
Nozzle Temperature 　 345-400 °C 　
Front - Zone 3 Temperature 　 345-400 °C 　
Middle - Zone 2 Temperature 　 340-400 °C 　
Rear - Zone 1 Temperature 　 330-400 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
UF5011S 　 　 　 　
Enhanced flow, Specialty filtered Polyetherimide (Tg 225C) with enhanced chemical resistance to strong acids, bases, aromatics and ketones. ECO Conforming.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 100 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 75 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 8 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 60 % ASTM D638
Tensile Modulus, 5 mm/min 　 2900 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 138 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3100 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 100 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 85 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 8 % ISO 527
Tensile Strain, break, 5 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 2900 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 110 MPa ISO 178
Flexural Modulus, 2 mm/min 　 2900 MPa ISO 178
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 2100 J/m ASTM D4812
Izod Impact, notched, 23°C 　 59 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 2080 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 30 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 7 kJ/m² ISO 179/1eA
Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm 　 7 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 227 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 213 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 201 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 216 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 204 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.50E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.50E-05 1/°C ASTM E831
Thermal Conductivity 　 0.31 W/m-°C ASTM C177
CTE, 23°C to 150°C, flow 　 5.50E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.50E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate A/50 　 220 °C ISO 306
Vicat Softening Temp, Rate B/50 　 215 °C ISO 306
Vicat Softening Temp, Rate B/120 　 215 °C ISO 306
HDT/Be, 0.45MPa Edgew 120*10*4 sp=100mm 　 210 °C ISO 75/Be
HDT/Ae, 1.8 MPa Edgew 120*10*4 sp=100mm 　 200 °C ISO 75/Ae
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 208 °C ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 198 °C ISO 75/Af
PHYSICAL 　 　 　 　
Specific Gravity 　 1.28 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.4-0.7 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.4-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.4-0.7 % SABIC method
Melt Flow Rate, 337°C/6.6 kgf 　 11 g/10 min ASTM D1238
Density 　 1.28 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.2 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.2 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 20 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Dielectric Strength, in oil, 3.2 mm 　 18 kV/mm ASTM D149
Relative Permittivity, 50/60 Hz 　 3.2 - ASTM D150
Dissipation Factor, 50/60 Hz 　 0.0021 - ASTM D150
Volume Resistivity 　 2.50E+15 Ω.cm IEC 60093
Surface Resistivity, ROA 　 >1.E+15 Ω IEC 60093
Dielectric Strength, in oil, 3.2 mm 　 18.1 kV/mm IEC 60243-1
Dissipation Factor, 50/60 Hz 　 0.0021 - IEC 60250
Comparative Tracking Index 　 150 V IEC 60112
Comparative Tracking Index, M 　 100 V IEC 60112
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 365-390 °C 　
Nozzle Temperature 　 360-380 °C 　
Front - Zone 3 Temperature 　 365-390 °C 　
Middle - Zone 2 Temperature 　 355-375 °C 　
Rear - Zone 1 Temperature 　 345-365 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
EXTEM™ Resin 　 　 　 　
The new EXTEM™ Resin portfolio of amorphous thermoplastic polyimide (TPI) and polyetherimide (PEI) resins offers a powerful combination of outstanding elevated thermal resistance up to 280 °C Tg; high strength, stiffness, and creep performance up to 230 °C, broad chemical resistance including chlorinated solvents; and eliminates the draw-backs of semi-crystalline materials, imidized thermosets, and competitive amorphous thermoplastics which can require post-molding curing or crystallization. In addition, EXTEM resin is inherently flame-retardant without the use of halogenated additives that can pose an environmental risk.
EXTEM is available in transparent and opaque custom colors, as well as glass filled grades. In the near future, EXTEM with additional fillers will be available through SABIC LNP™ Compounds to provide wear resistance performance, electrostatic dissipative properties, enhanced dimensional stability, and more. Plus, EXTEM resin portfolio is extremely versatile allowing SABIC to design products that can offer design engineers exceptional flexibility and freedom.
RH1017UCL 　 　 　 　
EXTEM™ RH1017UCL-1000 is a transparent, amorphous thermoplastic polyimide resin with high glass transition tempeture (Tg = 280 °C). This resin is near-IR transparent and injection moldable to produce complex optical lens assemblies while maintaining dimensional stability during 260 °C peak temperature through JEDEC-compliant solder reflow assembly process. Additional features are excellent mechanical, electrical and dimensional properties at high temperatures, including high refractive index similar to standard Ultem™. The material is RoHS compliant and the natural, uncolored, material is halogen free according to standards IEC 61249-2-21, IPC 4101E and JEDEC JS709B.AmericasAsiaEuropeGreater ChinaMEA
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
PHYSICAL 1) 　 　 　
Mold Shrinkage, flow 3) 1.0-1.1 % SABIC method
Specific Gravity 　 1.24 - ASTM D792
Water Absorption, (23°C/24hrs) 　 0.52 % ASTM D570
Melt Flow Rate, 367°C/6.6 kgf 　 10 g/10 min ASTM D1238
Density 　 1.2375 g/cm³ ISO 1183
THERMAL 1) 　 　 　
HDT, 1.82 MPa, 3.2mm, unannealed 　 255 °C ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed 　 270 °C ASTM D648
Vicat Softening Temp, Rate B/50 　 250 °C ASTM D1525
CTE, -20°C to 150°C, flow 　 4.90E-05 1/°C ASTM E831
CTE, -20°C to 150°C, xflow 　 5.30E-05 1/°C ASTM E831
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 250 °C ISO 75/Af
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm 　 270 °C ISO 75/Bf
Vicat Softening Temp, Rate B/50 　 278 °C ISO 306
Vicat Softening Temp, Rate B/120 　 277 °C ISO 306
IMPACT 1) 　 　 　
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched, 23°C 　 40 J/m ASTM D256
Izod Impact, unnotched, 23°C 　 1040 J/m ASTM D4812
Izod Impact, unnotched 80*10*4 +23°C 　 50 kJ/m² ISO 180/1U
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 3 kJ/m² ISO 179/1eA
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 60 kJ/m² ISO 179/1eU
MECHANICAL 1) 　 　 　
Tensile Stress, break, 5 mm/min 　 75 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 3 % ISO 527
Tensile Modulus, 5 mm/min 　 2900 MPa ASTM D638
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3100 MPa ASTM D790
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 180 MPa ASTM D790
Flexural Modulus, 2 mm/min 　 3000 MPa ISO 178
Flexural Stress, break, 2 mm/min 　 152 MPa ISO 178
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 175 °C 　
Drying Time 　 6月8日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 385-415 °C 　
Nozzle Temperature 　 385-415 °C 　
Front - Zone 3 Temperature 　 385-415 °C 　
Middle - Zone 2 Temperature 　 385-410 °C 　
Rear - Zone 1 Temperature 　 385-395 °C 　
Mold Temperature 　 175-220 °C 　
Intake (throat) temperature 　 70-100 °C 　
Back pressure (Plastic Pressure) 　 5月10日 MPa 　
Screw speed (Circumferential speed) 　 ≤0.2 m/s 　
Shot to Cylinder Size 　 40-70 % 　
Vent Depth 　 0.026-0.076 mm 　
OPTICAL 　 　 　 　
Light Transmission 　 　 　 　
at 1310 nm 　 88 % SABIC method
at 850 nm 　 87 % SABIC method
Refractive Index 　 　 　 　
at 1350 nm 　 1.627 - ISO 489
at 850 nm 　 1.639 - ISO 489
Abbe number 　 18 - ISO 489
　 　 　 　 　
VH1003 　 　 　 　
Transparent, Thermoplastic Polyimide (TPI) resin with a glass transition temperature (Tg) of 247C. This product has thinwall FR capability and has a UL94 V0 listing. This material is RoHS compliant and also halogen free according VDE/DIN 472 part 815. Resin is subject to U.S. Commerce Control Laws (15CFR Chapter VII, Part 774).EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-257957 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
Glow Wire Flammability Index 960°C, passes at 　 3.2 mm IEC 60695-2-12
Glow Wire Ignitability Temperature, 3.0 mm 　 850 °C IEC 60695-2-13
Oxygen Index (LOI) 　 45 % ISO 4589
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 6 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 50 % ASTM D638
Tensile Modulus, 5 mm/min 　 3510 MPa ASTM D638
Flexural Stress, brk, 1.3 mm/min, 50 mm span 　 159 MPa ASTM D790
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 155 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3170 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 95 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 78 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 8.5 % ISO 527
Tensile Strain, break, 5 mm/min 　 16.8 % ISO 527
Tensile Modulus, 1 mm/min 　 3110 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 123 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3080 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 NB J/m ASTM D4812
Izod Impact, notched, 23°C 　 69 J/m ASTM D256
Izod Impact, notched, -30°C 　 74 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 33 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 242 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 217 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 237 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 230 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.00E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.00E-05 1/°C ASTM E831
Thermal Conductivity 　 0.22 W/m-°C ASTM E1530
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 242 °C ISO 306
Vicat Softening Temp, Rate B/120 　 238 °C ISO 306
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 228 °C ISO 75/Af
Relative Temp Index, Elec 1) 160 °C UL 746B
Relative Temp Index, Mech w/impact 1) 120 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 160 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.3 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 367°C/6.6 kgf 　 15.5 g/10 min ASTM D1238
Density 　 1.3 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.75 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 8 cm³/10 min ISO 1133
OPTICAL 　 　 　 　
Light Transmission, 2.54 mm 　 58 % ASTM D1003
Haze, 2.54 mm 　 2 % ASTM D1003
ELECTRICAL 　 　 　 　
Dielectric Strength, in oil, 3.2 mm 　 17 kV/mm ASTM D149
Relative Permittivity, 100 Hz 　 3.41 - ASTM D150
Relative Permittivity, 1 kHz 　 3.41 - ASTM D150
Dissipation Factor, 50/60 Hz 　 0.025 - IEC 60250
Dissipation Factor, 100 Hz 　 0.008 - IEC 60250
Dissipation Factor, 1 kHz 　 0.001 - IEC 60250
Dissipation Factor, 1 MHz 　 0.007 - IEC 60250
Comparative Tracking Index 　 175 V IEC 60112
Comparative Tracking Index (UL) {PLC} 　 3 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 380-405 °C 　
Nozzle Temperature 　 375-400 °C 　
Front - Zone 3 Temperature 　 380-405 °C 　
Middle - Zone 2 Temperature 　 370-395 °C 　
Rear - Zone 1 Temperature 　 360-380 °C 　
Mold Temperature 　 140-180 °C 　
Intake (throat) temperature 　 70-100 °C 　
Back pressure (Plastic Pressure) 　 5月10日 MPa 　
Screw speed (Circumferential speed) 　 <0.2 m/s 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
VH1003F 　 　 　 　
Transparent, Thermoplastic Polyimide (TPI) resin with a glass transition temperature (Tg) of 247C. This product has thinwall FR capability and has a UL94 V0 listing. This material is RoHS compliant and also halogen free according VDE/DIN 472 part 815. Global Food Contact Approvals. Resin is a Dual-use item and is subject to export control restrictions under both U.S. 15 CFR 774 and Annex I of Reg. (EC) 428/2009 as ECCN 1C008. Diversion contrary to law is prohibited.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 6 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 50 % ASTM D638
Tensile Modulus, 5 mm/min 　 3510 MPa ASTM D638
Flexural Stress, brk, 1.3 mm/min, 50 mm span 　 159 MPa ASTM D790
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 155 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3170 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 95 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 78 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 8.5 % ISO 527
Tensile Strain, break, 5 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 3110 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 123 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3080 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 NB J/m ASTM D4812
Izod Impact, notched, 23°C 　 69 J/m ASTM D256
Izod Impact, notched, -30°C 　 74 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 33 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 242 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 217 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 237 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 230 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.00E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.00E-05 1/°C ASTM E831
Thermal Conductivity 　 0.22 W/m-°C ASTM E1530
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 242 °C ISO 306
Vicat Softening Temp, Rate B/120 　 238 °C ISO 306
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 228 °C ISO 75/Af
PHYSICAL 　 　 　 　
Specific Gravity 　 1.3 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 367°C/6.6 kgf 　 15.5 g/10 min ASTM D1238
Density 　 1.3 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.75 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 8 cm³/10 min ISO 1133
OPTICAL 　 　 　 　
Light Transmission, 2.54 mm 　 58 % ASTM D1003
Haze, 2.54 mm 　 2 % ASTM D1003
ELECTRICAL 　 　 　 　
Dielectric Strength, in oil, 3.2 mm 　 17 kV/mm ASTM D149
Relative Permittivity, 100 Hz 　 3.41 - ASTM D150
Relative Permittivity, 1 kHz 　 3.41 - ASTM D150
Dissipation Factor, 50/60 Hz 　 0.025 - IEC 60250
Dissipation Factor, 100 Hz 　 0.008 - IEC 60250
Dissipation Factor, 1 kHz 　 0.001 - IEC 60250
Dissipation Factor, 1 MHz 　 0.007 - IEC 60250
Comparative Tracking Index 　 175 V IEC 60112
FLAME CHARACTERISTICS 　 　 　 　
Glow Wire Flammability Index 960°C, passes at 　 3.2 mm IEC 60695-2-12
Glow Wire Ignitability Temperature, 3.0 mm 　 850 °C IEC 60695-2-13
Oxygen Index (LOI) 　 45 % ISO 4589
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 380-405 °C 　
Nozzle Temperature 　 375-400 °C 　
Front - Zone 3 Temperature 　 380-405 °C 　
Middle - Zone 2 Temperature 　 370-395 °C 　
Rear - Zone 1 Temperature 　 360-380 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
VH1003M 　 　 　 　
Transparent, Thermoplastic Polyimide (TPI) resin with a glass transition temperature (Tg) of 247C. Internal mold release. This product has thinwall FR capability and has a UL94 V0 listing. This material is RoHS compliant and also halogen free according VDE/DIN 472 part 815.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-257957 - -
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.75 mm UL 94
Glow Wire Flammability Index 960°C, passes at 　 3.2 mm IEC 60695-2-12
Glow Wire Ignitability Temperature, 3.0 mm 　 850 °C IEC 60695-2-13
Oxygen Index (LOI) 　 45 % ISO 4589
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 6 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 50 % ASTM D638
Tensile Modulus, 5 mm/min 　 3510 MPa ASTM D638
Flexural Stress, brk, 1.3 mm/min, 50 mm span 　 158 MPa ASTM D790
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 155 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3170 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 95 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 78 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 8.4 % ISO 527
Tensile Strain, break, 5 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 3120 MPa ISO 527
Flexural Stress, break, 2 mm/min 　 123 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3070 MPa ISO 178
Ball Indentation Hardness, H358/30 　 138 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 NB J/m ASTM D4812
Izod Impact, notched, 23°C 　 69 J/m ASTM D256
Izod Impact, notched, -30°C 　 74 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 33 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 196 kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 147 kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 6 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 242 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 217 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 237 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 230 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.00E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.00E-05 1/°C ASTM E831
Thermal Conductivity 　 0.22 W/m-°C ASTM E1530
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 242 °C ISO 306
Vicat Softening Temp, Rate B/120 　 240 °C ISO 306
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 228 °C ISO 75/Af
Relative Temp Index, Elec 1) 160 °C UL 746B
Relative Temp Index, Mech w/impact 1) 120 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 160 °C UL 746B
PHYSICAL 　 　 　 　
Specific Gravity 　 1.3 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 367°C/6.6 kgf 　 15.5 g/10 min ASTM D1238
Density 　 1.3 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.75 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.65 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 8 cm³/10 min ISO 1133
ELECTRICAL 　 　 　 　
Dielectric Strength, in oil, 3.2 mm 　 14 kV/mm ASTM D149
Relative Permittivity, 100 Hz 　 3.38 - ASTM D150
Relative Permittivity, 1 kHz 　 3.37 - ASTM D150
Dissipation Factor, 50/60 Hz 　 0.018 - IEC 60250
Dissipation Factor, 100 Hz 　 0.008 - IEC 60250
Dissipation Factor, 1 kHz 　 0.001 - IEC 60250
Dissipation Factor, 1 MHz 　 0.007 - IEC 60250
Comparative Tracking Index 　 175 V IEC 60112
Comparative Tracking Index (UL) {PLC} 　 3 PLC Code UL 746A
Hot-Wire Ignition (HWI), PLC 1 　 ≥3 mm UL 746A
Hot-Wire Ignition (HWI), PLC 2 　 ≥0.75 mm UL 746A
High Amp Arc Ignition (HAI), PLC 4 　 ≥0.75 mm UL 746A
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 380-405 °C 　
Nozzle Temperature 　 375-400 °C 　
Front - Zone 3 Temperature 　 380-405 °C 　
Middle - Zone 2 Temperature 　 370-395 °C 　
Rear - Zone 1 Temperature 　 360-380 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
VH1003P 　 　 　 　
Transparent, Thermoplastic Polyimide (TPI) resin with a glass transition temperature (Tg) of 247C. Powder version of VH1003.EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
MECHANICAL 　 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 96 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 6 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 50 % ASTM D638
Tensile Modulus, 5 mm/min 　 3510 MPa ASTM D638
Flexural Stress, brk, 1.3 mm/min, 50 mm span 　 159 MPa ASTM D790
Flexural Stress, yld, 2.6 mm/min, 100 mm span 　 155 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 3170 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 95 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 78 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 8.5 % ISO 527
Tensile Strain, break, 5 mm/min 　 50 % ISO 527
Tensile Modulus, 1 mm/min 　 3110 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 123 MPa ISO 178
Flexural Modulus, 2 mm/min 　 3080 MPa ISO 178
Ball Indentation Hardness, H358/30 　 140 MPa ISO 2039-1
IMPACT 　 　 　 　
Izod Impact, unnotched, 23°C 　 NB J/m ASTM D4812
Izod Impact, notched, 23°C 　 69 J/m ASTM D256
Izod Impact, notched, -30°C 　 74 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 33 J ASTM D3763
Izod Impact, unnotched 80*10*4 +23°C 　 NB kJ/m² ISO 180/1U
Izod Impact, unnotched 80*10*4 -30°C 　 NB kJ/m² ISO 180/1U
Izod Impact, notched 80*10*4 +23°C 　 4 kJ/m² ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm 　 NB kJ/m² ISO 179/1eU
THERMAL 　 　 　 　
Vicat Softening Temp, Rate B/50 　 242 °C ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed 　 217 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 237 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 230 °C ASTM D648
CTE, -40°C to 150°C, flow 　 5.00E-05 1/°C ASTM E831
CTE, -40°C to 150°C, xflow 　 5.00E-05 1/°C ASTM E831
Thermal Conductivity 　 0.22 W/m-°C ASTM E1530
CTE, 23°C to 150°C, flow 　 5.00E-05 1/°C ISO 11359-2
CTE, 23°C to 150°C, xflow 　 5.00E-05 1/°C ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C 　 Passes - IEC 60695-10-2
Vicat Softening Temp, Rate B/50 　 242 °C ISO 306
Vicat Softening Temp, Rate B/120 　 238 °C ISO 306
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 　 228 °C ISO 75/Af
PHYSICAL 　 　 　 　
Specific Gravity 　 1.3 - ASTM D792
Mold Shrinkage on Tensile Bar, flow 　 0.5-0.7 % SABIC method
Mold Shrinkage, flow, 3.2 mm 　 0.5-0.7 % SABIC method
Mold Shrinkage, xflow, 3.2 mm 　 0.5-0.7 % SABIC method
Melt Flow Rate, 367°C/6.6 kgf 　 15.5 g/10 min ASTM D1238
Density 　 1.3 g/cm³ ISO 1183
Water Absorption, (23°C/saturated) 　 1.75 % ISO 62-1
Moisture Absorption (23°C / 50% RH) 　 0.6 % ISO 62
Melt Volume Rate, MVR at 360°C/5.0 kg 　 8 cm³/10 min ISO 1133
OPTICAL 　 　 　 　
Light Transmission, 2.54 mm 　 58 % ASTM D1003
Haze, 2.54 mm 　 2 % ASTM D1003
ELECTRICAL 　 　 　 　
Dielectric Strength, in oil, 3.2 mm 　 17 kV/mm ASTM D149
Relative Permittivity, 100 Hz 　 3.41 - ASTM D150
Relative Permittivity, 1 kHz 　 3.41 - ASTM D150
Dissipation Factor, 50/60 Hz 　 0.025 - IEC 60250
Dissipation Factor, 100 Hz 　 0.008 - IEC 60250
Dissipation Factor, 1 kHz 　 0.001 - IEC 60250
Dissipation Factor, 1 MHz 　 0.007 - IEC 60250
Comparative Tracking Index 　 175 V IEC 60112
FLAME CHARACTERISTICS 　 　 　 　
Glow Wire Flammability Index 960°C, passes at 　 3.2 mm IEC 60695-2-12
Glow Wire Ignitability Temperature, 3.0 mm 　 850 °C IEC 60695-2-13
Oxygen Index (LOI) 　 45 % ISO 4589
INJECTION MOLDING 　 　 　 　
Drying Temperature 　 150 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 380-405 °C 　
Nozzle Temperature 　 375-400 °C 　
Front - Zone 3 Temperature 　 380-405 °C 　
Middle - Zone 2 Temperature 　 370-395 °C 　
Rear - Zone 1 Temperature 　 360-380 °C 　
Mold Temperature 　 135-165 °C 　
Back Pressure 　 0.3-0.7 MPa 　
Screw Speed 　 40-70 rpm 　
Shot to Cylinder Size 　 40-60 % 　
Vent Depth 　 0.025-0.076 mm 　
　 　 　 　 　
XH1015 　 　 　 　
Thermoplastic Polyimide Extem* XH1015 Resin. Also UL rating 94V0 at 1.5 and 3.0.EuropeAsiaAmericas
XH2115 　 　 　 　
EXTEM XH2115 resin is a HIGH FLOW, 10% glass fiber reinforced, amorphous Polyimide (PI) resin, with high glass transition temperature (Tg = 265 °C). Features include excellent mechanical, electrical and dimensional properties at low and high temperatures. EXTEM™ XH2115 can withstand SMT soldering temperatures up to 245 °C. The material may offer good chemical resistance for an amorphous material and is inherently flame retardant. This material is RoHS compliant.AmericasAsiaEuropeGreater ChinaMEA
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
INJECTION MOLDING 1) 　 　 　
Drying Temperature 　 175 °C 　
Drying Time (Cumulative) 　 4月6日 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 380-410 °C 　
Nozzle Temperature 　 375-405 °C 　
Front - Zone 3 Temperature 　 380-410 °C 　
Middle - Zone 2 Temperature 　 370-400 °C 　
Rear - Zone 1 Temperature 　 360-380 °C 　
Mold Temperature 　 160-200 °C 　
Back Pressure 　 .3-.9 MPa 　
Shot to Cylinder Size 　 40-70 % 　
Vent Depth 　 0.025-0.076 mm 　
Screw speed (Circumferential speed) 　 0.15-0.25 m/s 　
MECHANICAL 2) 　 　 　
Tensile Stress, break 　 100 MPa ASTM D638
Tensile Strain, break 　 3 % ASTM D638
Tensile Modulus, 5 mm/min 　 4000 MPa ASTM D638
Flexural Stress, brk, 1.3 mm/min, 50 mm span 　 140 MPa ASTM D790
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 140 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 4100 MPa ASTM D790
Tensile Stress, break, 5 mm/min 　 90 MPa ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 4300 MPa ISO 527
Flexural Strength, 2 mm/min 　 140 MPa ISO 178
Flexural Strain, break, 2 mm/min 　 2 % ISO 178
Flexural Modulus, 2 mm/min 　 4300 MPa ISO 178
IMPACT 2) 　 　 　
Izod Impact, notched, 23°C 　 30 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 250 J/m ASTM D256
Izod Impact, notched 80*10*3 +23°C 　 3 kJ/m² ISO 180/1A
THERMAL 2) 　 　 　
HDT, 1.82 MPa, 6.4 mm, unannealed 　 240 °C ASTM D648
HDT, 0.45 MPa, 6.4 mm, unannealed 　 250 °C ASTM D648
Vicat Softening Temp, Rate A/50 　 263 °C ISO 306
Vicat Softening Temp, Rate B/120 　 250 °C ISO 306
PHYSICAL 2) 　 　 　
Specific Gravity 　 1.38 - ASTM D792
Melt Flow Rate, 367°C/6.6 kgf 　 16 g/10 min ASTM D1238
Melt Volume Rate, MVR at 400°C/10.0 kg 　 18 cm³/10 min ISO 1133
Melt Volume Rate, MVR at 360°C/2.16 kg 　 13 cm³/10 min ISO 1133
Thermal properties 　 　 　 　
Vicat Softening Point, (Rate A/50°C) 2) 260 °C ASTM D1525
　 　 　 　 　
XH2315 　 　 　 　
Extem XH2315 Resin. Also UL rating V094 at 0.75 and V0,5VA at 1.0 and 1.5-1.65EuropeAsiaAmericas
PROPERTIES 　 TYPICAL VALUES UNITS TEST METHODS
FLAME CHARACTERISTICS 1) 　 　 　
UL Yellow Card Link 　 E121562-100988559 - -
UL Recognized, 94-5VA Flame Class Rating 　 ≥1 mm UL 94
UL Recognized, 94V-0 Flame Class Rating 　 ≥0.4 mm UL 94
INJECTION MOLDING 2) 　 　 　
Drying Temperature 　 175 °C 　
Drying Time 　 4月6日 Hrs 　
Drying Time (Cumulative) 　 24 Hrs 　
Maximum Moisture Content 　 0.02 % 　
Melt Temperature 　 380-405 °C 　
Nozzle Temperature 　 375-400 °C 　
Front - Zone 3 Temperature 　 380-405 °C 　
Middle - Zone 2 Temperature 　 370-395 °C 　
Rear - Zone 1 Temperature 　 360-380 °C 　
Mold Temperature 　 160-200 °C 　
Intake (throat) temperature 　 70-100 °C 　
Back pressure (Plastic Pressure) 　 3月10日 MPa 　
Screw speed (Circumferential speed) 　 <0.2 m/s 　
Shot to Cylinder Size 　 40-70 % 　
Vent Depth 　 0.025-0.076 mm 　
ELECTRICAL 3) 　 　 　
Comparative Tracking Index (UL) {PLC} 1) 4 PLC Code UL 746A
PHYSICAL 3) 　 　 　
Specific Gravity 　 1.52 - ASTM D792
Water Absorption, (23°C/48hrs) 　 0.59 % ASTM D570
Melt Flow Rate, 367°C/6.6 kgf 　 4 g/10 min ASTM D1238
Density 　 1.52 g/cm³ ISO 1183
THERMAL 3) 　 　 　
Vicat Softening Temp, Rate B/50 　 267 °C ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed 　 257 °C ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed 　 254 °C ASTM D648
HDT, 1.82 MPa, 6.4 mm, unannealed 　 255 °C ASTM D648
CTE, 23°C to 150°C, flow 　 1.60E-05 1/°C ASTM E831
CTE, 23°C to 150°C, xflow 　 5.30E-05 1/°C ASTM E831
Relative Temp Index, Elec 1) 105 °C UL 746B
Relative Temp Index, Mech w/impact 1) 105 °C UL 746B
Relative Temp Index, Mech w/o impact 1) 105 °C UL 746B
IMPACT 3) 　 　 　
Izod Impact, notched, 23°C 　 86 J/m ASTM D256
Izod Impact, Reverse Notched, 3.2 mm 　 320 J/m ASTM D256
Instrumented Dart Impact Total Energy, 23°C 　 8 J ASTM D3763
Izod Impact, notched 80*10*4 +23°C 　 5 kJ/m² ISO 180/1A
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm 　 24 kJ/m² ISO 179/1eA
MECHANICAL 3) 　 　 　
Tensile Stress, yld, Type I, 5 mm/min 　 156 MPa ASTM D638
Tensile Stress, brk, Type I, 5 mm/min 　 156 MPa ASTM D638
Tensile Strain, yld, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Strain, brk, Type I, 5 mm/min 　 3 % ASTM D638
Tensile Modulus, 5 mm/min 　 10230 MPa ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 　 206 MPa ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span 　 8960 MPa ASTM D790
Tensile Stress, yield, 5 mm/min 　 147 MPa ISO 527
Tensile Stress, break, 5 mm/min 　 147 MPa ISO 527
Tensile Strain, yield, 5 mm/min 　 2 % ISO 527
Tensile Strain, break, 5 mm/min 　 2 % ISO 527
Tensile Modulus, 1 mm/min 　 10530 MPa ISO 527
Flexural Stress, yield, 2 mm/min 　 200 MPa ISO 178
Flexural Modulus, 2 mm/min 　 9000 MPa ISO 178
Previous article The next one Return

Recommended news

POM is applied to gears

POM is applied to gears

2025-01-17
Which manufacturers are producing imported conductive plastics? What models are there?

Which manufacturers are producing imported conductive plastics? What models are there?

2024-12-30
About Hongrun
Company
Culture
Honor
Warehouse
Customer
Product Center
ABS
PC
POM
PPS
PEI
PBT
LCP
PEEK
Nylon
PE
PP
TPU
TPV
TPE
PMMA
PVDF
ASA
HT-Nylon
Alloy
GPPS
HIPS
EVA
PPO
Spec-Nylon
PSU
PVC
TPEE
PCTG
FEP
COC
PARA
All 》
More 》
Industry application
Cost-Effective Conductive Nylon: Maximum Protection, Optimized Budget
Cost-Effective Conductive PA12: Superior Performance, Smart Savings
Cost-Effective Conductive PP: Essential Protection, Exceptional Value
Cost-Effective Conductive PA66: Maximum Performance, Optimized Budget
Cost-Effective Conductive PEEK: Extreme Performance, Optimized Value
Cost-Effective Conductive PC: Crystal Clear Protection, Smart Savings
Cost-Effective Conductive POM: Precision Protection, Maximum Value
Cost-Effective Conductive ABS: Smart Protection, Maximum Savings
All 》
Quick Navigation
Plastic price
Supply and Demand Release
Recommended supplier
Plastic technology
Follow us

Scan the wechat code for consultation

Copyright © 2024 Shanghai Ponci Trading Co., LTD All Rights Reserved.
Friendship link
Shanghai Ponci Trading Co., LTD Yuming Plasticizing hongrunplastics